Operation Manual

ELECTRONIC PROGRAM GUIDE
SETUP MENU
1. Channel Guide
TV channels
Radio channels
Channels class
Channels edit
(Need signal source support)
(Need signal source support)
(Need signal
source support).
1. Press SETUP Button on the remote or press and hold this
button on the unit once, the setup menu will be called out
on the screen.
2. Use navigation LEFT/RIGHT button to switch among the
three different main setup interfaces. Press navigation
UP/DOWN button to highlight the setting options and enter
corresponding submenu as indication. After setting, press
SETUP button on the remote or press and hold SETUP
button to go back main setup interface.
3. Use SETUP button to exit setup menu.
- It is used to enter the TV channels list for you
to select or sort the TV channels as your desired.
- It is used to enter the Radio channels list
for you to select or sort the Radio channels as your desired.
- Select this option to edit the programs as
your desired.
- Select this option to edit the channels name,
move or delete the channels as your desired.
Press EPG on the remote button to enter into electronic
program guide in DVB mode .
Press INFO button during DVB play mode to show the
program detail information .
Press LANGUAGE button on the remote to change different
language supplied by TV programs in DVB mode
Press FAV button to enable or disable the favorite function
after set the channels class on the setup menu, and press
navigation UP/DOWN menu to switch the channel among
your favorite channels selected on the setup menu.
PROGRAM INFORMATION
LANGUAGE
FAVORITE
DVB-T
2. System config
TV setting
Video setting
Language
Parent Control
Time setting
System info
TV system: it is used to select TV system.
TV type: it is used to select the TV scan mode, please set as
per your TV set.
Options: 4:3PS : Normal Pan & scan mode
4:3LB : Normal Letter box mode
16:9 : 16:9 wide screen mode
BRIGHTNESS - to set the brightness for the display.
CONTRAST - to set the contrast effect for display.
HUE - to set the colour impression for display.
SATURATION - to set the saturation level for display.
Please select one of desired language for the system.
Change pin-It is used to change the password.
1) Enter old password in the OLD PIN row
2) Enter new password in the NEW PIN row
3) Enter the new password again in the CONFIRM row
The default user password is 0000.
Channel lock-it is used to Lock the channels.
Time zone-it is used to select local time zone.
Select this option, the system info shows on the screen such
as: Update date, Tuner info, F/W version Model version etc.
3. Installation
Auto Scan
Manual scan
Default setup
-select one of country from <select area> row, then
enter <start scan> row by navigation button to begin scanning
the channels.
-scroll to manual scan option, a dialogue shows
on the screen for you to set, after then, select <start scan>
option to begin scanning the channels.
-select this option to restore the factory setting.
5
Hold the disc by the edge so the surface will not
be soiled with finger prints. Finger prints, dirt and
scratches can cause skipping and distortion.
Do not write on the label side with a ball-point
pen or other writing utensils.
Do not apply benzine, thinner, and liquid that
prevents against static electricity.
Be careful not to drop or bend the disc.
Install only one disc on the disc tray.
Do not try to close the disc tray when the disc is
not installed properly.
Be sure to store the disc in its case when not in
use.
DISC HANDLING PRECAUTIONS
SPECIFICATIONS:
Power source:
Power consumption:
TV Output (DVD):
Operating Temperature Range:
Continuous playing time:
Dimensions:
Operating Humidity Range:
Disc supportable:
Audio signal output:
AC: 100-240V~50/60Hz
DC: 9V 1.5A
9W
NTSC/PAL
+5 C to +35 C
120 minutes
242 (L)X180(W)X42.6(H) mm
10 % to 75 %
1. DVD-VIDEO disc
12 cm single-sided, single-layer
12 cm single-sided, dual-layer
12 cm double-sided, single-layer
8 cm single-sided, single-layer
8 cm single-sided, dual-layer
8 cm double-sided, single-layer
2. CD-DA/CD-R/CD-RW/MP3-CD/MPEG4-CD
12cm disc
8cm disc
1. DVD (linear audio)
(1) Frequency response:20Hz-20KHz (48KHz
sampling) & 20Hz-20KHz (96KHz sampling)
(2) S/N ratio: >55dB
(3) Dynamic range: 70dB
2. CD audio:
(1) Frequency response: 20Hz-20KHz
(2) S/N ratio: >55dB
(3) Dynamic range: 70dB
Specifications are subject to change without notice.
oo