User's Manual

Appendix B: Reference Information
V1.5 BlueTree Wireless BT-2010 Product Manual 59
You can check the state of the Auto-Connect feauture but its progress
indicator.
Connection status
The Connection Status field will display the following data connection
states:
Microsoft DUN
(Dial-Up
Networking)
Visit www.microsoft.com for detailed information on Dial-Up
Networking.
Progress Indicator Description
Gray indicates that the Auto-Connect
feature is disabled.
A red progress bar (moving from left to
right) indicates that the Auto-Connect
feature is working but is unable to
establish a connection due to
conditions such as insufficient received
signal or GPRS service is not
available.
A yellow progress bar (moving from left
to right) indicates that the conditions to
connect have been fulfilled - BlueVue
is attempting to establish a connection.
Green indicates that all of the
conditions have been met - a data
connection has been established.
Status Indicator Description
Ready To Connect Modem is ready for you to establish a data connection with
the network.
Modem Not Detected Modem is either not powered or not connected to your
computer.
No Wireless Service No wireless service is available.
Transmitter is disabled The radio transmitter has been manually turned off.
Agent is paused BlueVue Agent is paused.
<supplementary info> Additional Windows data networking information will be
displayed during the progress of establishing the data
connection.