User's Manual

Chapter 1: Installing the Modem
20 BlueTree Wireless M2M Express Product Manual V1.5
To install BlueVue:
3. After you have downloaded BlueVue software, click on the
bluevuegprscdma.msi file to start the installation.
4. On the License Agreement screen select I accept the terms in
the license agreement, and then click Next.
5. On the Select Your Configuration screen, in the Please select your
model number list, select your modem. If you don’t know the model
number of the modem, you can find it on the product label located on
the bottom of the modem.
6. On the COM Port Selection screen, in the Select Primary (Data)
COM Port list, select an available COM port that will be used for
transferring data. Your selection must correspond to the serial port
connected to the modem labeled DATA.
7. Click Next.
8. On the Ready to Install the Program screen click Install.
9. On the Software Installation warning screen, click Continue
Anyway. BlueTree has done extensive testing of the software to
ensure its reliability and as part of the submission for Windows
certification.
10. On the Hardware Installation warning screen, click Continue
Anyway. Again, BlueTree has done extensive testing of the software to
ensure its reliability and as part of the submission for Windows
certification.
11. On the BlueTree Installation Wizard Complete screen select
Launch the program if you want the installation wizard to start the
application, and then click Finish.
BlueVue 2.x is now installed on your PC and operates as an element of
the Windows operating system. You will notice:
• On the Windows task bar a BlueTree icon appears.
• A new item appears in the Control Panel: BlueTree Wireless Data.
Caution: If you are using a USB-to-Serial adapter instead
of an integrated serial port, make sure the adapter is
inserted into the USB socket before continuing. If the USB-
to-Serial adapter is not plugged in, the installation wizard
will not detect all available COM ports.