User's Manual

Chapter 3: Connecting to the Wireless Network
V1.5 BlueTree Wireless M2M Express Product Manual 27
Chapter 3: Connecting to the Wireless Network
Connecting to the wireless network is simple, whether you use BlueVue
or Dial-Up Networking.
Using BlueVue
Starting BlueVue You can start BlueVue one of two ways:
• Double-click the BlueTree icon on the Windows task bar
• Click Start > Programs > BlueTree > BlueVue GPRS
BlueVue’s main window appears.
Connecting to the
network
To connect to the wireless network:
Manually
1. From the Profiles list select a connection profile.
In a few moments, the modem status field will display the globe
symbol. The lower-right area displays the connection statistics for your
wireless session. You are now connected to the wireless network.
Auto-Connect and Auto-Reconnect
If the Auto-Connect Enable box is checked, then BlueVue will
automatically establish a data connection when Windows starts and
before you log on.
BlueVue will automatically attempt to re-connect a data link if a
previous data session was broken due to loss of signal.
1. Click the Enable box in the Auto-Connect section to enable the
feature.