User guide
English
6 I BLUETREK CRESCENDO
Multi-point function
Multipoint technology which allows you to use one headset with two dierent Bluetooth
mobile phone simultaneity. Please see the instructions as below:
Enable the multi-point function
1. Pair the headset to the mobile A (Please refer to “pairing” section).
2. Long press the Vol + and the Vol - button together on the headset under stand-by mode,
when heard a “beep”, release the buttons and you will hear “Multi-point on” prompt to
nish, the multi-point function will be enabled.
3. Press Main button and the Vol - button together to reset the hardware, the headset will
turn o automatically.
4. Press and hold the Main button for about 5 seconds to enter into pairing mode, then pair
it to the mobile B.(Please refer to “pairing” section).
5. Turn o and turn on again the headset. Two mobiles will be connected with the headset
automatically.