EB200P Portable Power Station Please read and fully understand this manual before use and keep it handy for future reference.
User Manual Please read and fully understand this manual before use and keep it handy for future reference.
CONTENTS 1. BRIEF INTRODUCTION ......………………………………….........................………01 2. ABBREVIATION .....…………………………………………......................................01 3. SAFETY INSTRUCTION ......………………………............................………………01 4. IN THE BOX ....…………………………………............................................………02 5. FUNCTIONS .....………………………………...........................................…………04 6. LET'S GET STARTED ......…………………………............................………………05 7. TOUCHSCREEN GUIDE......……………............
1. BRIEF INTRODUCTION The EB200P features a 2200W pure sine wave inverter and 2048Wh LiFePO4 battery pack, enough to power your daily essential electricity needs. Furthermore, it has the built-in 30A NEMA TT-30 receptacle designed for the RV and the fast-charging 100W PD3.0 USB-C port. Additionally, with an MPPT controller which can handle up to 900W solar input perfectly, it supports AC + Solar 1400W Max. and dual AC 1000W Max. Charging.
● DO NOT move the EB200P in use since vibrations and sudden impacts may lead to poor connections to the hardware inside. ● Please read and fully understand the operating instructions of the electrical products to be connected. Failure to operate the electrical products properly may result in accidents or injuries. ● Please use the original charger and cables only designed for the EB200P. BLUETTI is not liable for damage caused by third-party equipment, which also may invalidate your warranty.
No. Picture Category Quantity 6 User Manual 1PCS 7 Warranty Card 1PCS 8 Certificate of QC PASS 1PCS Optional Accessories No. 9 Picture Category Lead-acid Battery Charging Clamp Charging EB200P through lead-acid battery only. DO NOT charge the lead-acid battery via this cable. 10 Type Multifunctional Input Cable (XT90 - DC7909) Optional Input Cable Expand the charging methods via AC input port. 11 12V/30A Output Bundle (Aviation - XT60, XT60 - SPC45) Perfect for RV.
5. FUNCTIONS 09 01 02 10 03 11 04 05 12 06 07 08 01 DC 12V/10A cigarette lighter port 08 02 09 DC 5521 12V/10A output x 2pcs Traditional ports for routers/cameras, old laptop, etc. 03 DC 12V/30A output 10 Interaction LCD touchscreen Control the EB200P with figures. USB-A 18W output x 2pcs Quick charge USB-A ports. 05 Wireless charging pad 15W x 2pcs Place your phone (if wireless charging supported) on the top of the EB200P horizontally, and turn on the DC.
6. LET'S GET STARTED (1) Startup: short press the power button, the indicator light will be on, and the machine will be on standby. (2) Shutdown: press and hold the power button for several seconds, and the indicator light will be off and the machine will shut down. The LED indicator lamp status explanation BMS Over-current or short circuit protection The indicator light flashes and then turns off. BMS Startup timeout The indicator light flashes and does not turn off.
Friendly Note: ● The LCD touchscreen is resistive. It is recommended to lightly tap or press the screen with fingers until it 'beeps'. ● In order to maximize the lifespan of the LCD screen, please avoid direct sunlight. (1) When pressing the power button, the mainpage of the LCD screen will display as Homepage. (Homepage) (Figure 1) a. PV/Car Charging Info e. DC ON/OFF Switch b. BMS Info f. AC ON/OFF Switch c. Date/Time g. Adapter Charging Info d. DC Load Info h.
（Figure 2） (3) Back to the Homepage, tap the 'Data' to enter the Data section (Figure 3).
8. CHARGING (1) From the AC wall outlet ● Turn the EB200P on and connect the adapter plug to the wall outlet, the other end to the AC input port. Charging will automatically stop when it gets fully charged. ▼ AC socket 2 ▲ AC-DC adapter (2) From the solar panels ● Connect the solar panels (in series or parallel) with Open Circuit Voltage range 10V-145V. ● Connect the solar panels to EB200P via the solar charging cable.
(3) From the car cigarette lighter port ● Turn the EB200P on and connect it to the car cigarette lighter port via the car charging cable. ● Enter the setting section as Figure 1 to set the 'DC Input Source' into 'Others'. ● The input current requirement of car charging: 8.2A. 4 5 (4) From the generator (gasoline, propane or diesel) ● Connect the AC adapter input to the generator and the output port to the AC charging port of the EB200P. ● Turn the EB200P on, and it will be charged.
9 5 (6) Dual Charging ● Set the 'DC Input Source' to 'PV' to achieve AC + PV Dual Charging. ● Set the 'DC Input Source' to 'Others' to achieve AC + Adapter/Lead-acid Battery Charging.
9. DISCHARGING (1) Turn on 12V/30A, 12V/10A, cigarette lighter port, USB-A, and USB-C output: press the power button to enter the Homepage, click the 'DC ON/OFF' and confirm. (2) Turn off the DC output: click the 'DC ON/OFF' and confirm. (3) Turn on the AC output: press the power button to enter the Homepage, click the 'AC ON/OFF' and confirm. (4) Turn off the AC output: click the 'AC ON/ OFF' and confirm. 10.
instantaneous start current may trigger overcurrent protection when peak value and rated current ratio exceeds 3:1. Thus, it's recommended to apply the EB200P to the electrical appliances with lower-rated power. (3) If an output over-current, overload, or short circuit occurs, the EB200P will turn off the corresponding output port. Then it will automatically start again (at an interval of 20s). Suppose there is still an over-current, overload, or short circuit.
13. TECHNICAL SPECIFICATIONS General Specs Rated Output power 2000W 2200W 2000W
14.
036 Parameters of Control Module Error 041 BMS Temperature Error 042 BMS Over Voltage 043 BMS Low Voltage 044 BMS Over Current 045 BMS Pre-charge Failure 046 BMS Output Short Circuit 051 AC Output Locked 053 USB-A/USB-C/PD Locked 054 12V/10A Locked 055 12V/30A Locked 15. FAQ (Frequently Asked Questions) ● How to claim the warranty? Please write your after-sales requirements on the warranty card and send it to the vendor.
16. DECLARATION ● Please note that specifications, appearance, and other upgrades are subject to improvement without prior notice. ● The company shall not be liable for any damage caused by force majeure, such as fires, typhoons, floods, earthquakes, or the user's intentional negligence, misuse, or other abnormal conditions. ● The company shall not be liable for damage caused by using non-standard adapters and accessories.
. Company: POWEROAK GmbH Address: Lindwurmstr. 114, 80337 München Germany Mail: logi@bluetti.de Company: POWEROAK ENERGY UK CO., LTD Address: Suite 108 Chase Business Center 39-41 Chase Side London United Kingdom N14 5BP Mail:poweroak.eu@bluetti.com P/N:17.0303.
