GPS NAVIGATION SYSTEM DNX6140/6000EX DNX5140 DDX514 DDX5034/BT MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System/DVD Receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Contents How to read this manual Before Use Notes Navigation Control 4 6 7 14 Using the Navigation System 14 Navigatoin Information Interrupt on the Screen of Other Sources (DNX6140/DNX6000EX/DNX5140 only) 14 Control of Other Sources While Displaying the Navigation Screen 15 Watching DVD/VCD 16 Functions During the Playback Screen 16 Functions When Displaying the Easy Control Panel 17 Functions While Displaying the Control Screen 17 DVD Disc Menu 18 VCD Zoom Control 20 Music Disc & Audio File Listen
Muting Audio Volume upon Reception of Phone Call Hands Free Unit Control 45 Muting Audio Volume upon Reception of Phone Call 45 Character Entry How to Use the Character Entry Screen 46 46 Screen Control 47 Screen Control 47 Setup Menu Setup Menu Audio Setup Crossover Network Setup DVD Setup Language Setup Parental Level Setup System Setup Panel Color Coordinate AV Interface Setup User Interface Direct Source Button Setup Entering Background Background Delete Background Select Touch Panel Adjustment
How to read this manual This manual uses illustrations to explain its operations. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. Seek Mode Sets a station selection. The mode is switched in following order each time you touch the button.
English 5
Before Use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. How to reset your unit • If the unit or the connected unit (disc auto changer, etc.) fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.
Notes Navigation units that can be connected to this unit (DDX514/DDX5034/DDX5034BT only) • • • * KNA-G510* • KNA-G431* KNA-DV4100 • KNA-DV3100 KNA-DV2100 Update the navigation software to the latest version. For how to update the software, refer to the instruction manual of the navigation unit. About HD Radio (KTC-HR300/KTC-HR200) When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio tuner features.
Notes Use of "DualDisc" About Video files When playing a "DualDisc" on this unit, the surface of the disc that is not played may be scratched while the disc is inserted or ejected. Since the music CD surface does not conform to the CD standard, playback may be impossible. (A "DualDisc" is a disc with one surface containing DVD standard signals and the other surface containing music CD signals.
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 DVD disc marks Operation regulatory marks Symbol With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual.
Basic Operations A SI indicator B C D E C B Turns power ON/OFF Switches to the Navigation system Press the button to turn on the power. When the button is pressed and held down for 1 second or more, the power is turned off. Press the button to switch the display to the navigation system screen. E E Adjusts the volume Attenuates the volume Turn it either way to adjust the volume. Press it to attenuate the volume. Press it again to cancel muting.
C Selecting a source Press it to display the source select screen. Touch the source button to select the source. Full Source Select screen 8 3 4 1 5 6 1 7 2 Favorite Source Select screen 9 1 Scrolls the source display. 2 Displays the Hands Free screen. (page 48) 3 Press for at least 2 seconds to erase the buttons. Touch the screen to redisplay the buttons. ⁄ • The displayed source depends on the type of device connected. In addition, you cannot press the button of currently unavailable source.
Basic Operations A SI indicator B C D E D B Switches to the Hands Free control Switches to the rear view Press it for more than 1 second to the Hands Free control screen. Press it again for more than 1 second to resume the normal display. Press it for more than 1 second to switch to rear view. Press it again for more than 1 second to resume the normal display. ⁄ • Functions of the [NAV] button can be changed to Display Off function.
D Switching the function screen The function control screen switches in the following order each time you press the button. Navigation screen Picture or Video playback screen Source Control screen [FNC] button [FNC] button [FNC] button Easy Control buttons appear. Easy Control buttons appear. Navigation information appears.
Navigation Control Sets and controls the navigation system function. Using the Navigation System Displays the navigation system screen and makes the navigation function available. 1 Displaying the navigation screen Navigation Information Interrupt on the Screen of Other Sources (DNX6140/DNX6000EX/DNX5140 only) Interrupts other source screen and displays information such as guide point. While a control screen is displaying: Navigation information appears on the bottom of the screen.
Control of Other Sources While Displaying the Navigation Screen 8 When touched this area, the source control screen appears. Selected source can be controlled while displaying navigation screen. When "TUNER" is selected: 9 9 10 10 11 1 Display the easy control buttons 9 Tunes in a station. p Switches the band (to AM or FM 1/2/3). q When touched this area, the source control screen appears.
Watching DVD/VCD You can play DVD/VCD using various functions. • For the basic method of how to watch DVD/VCD, see (page 10). • Set the remote controller mode switch to "DVD" mode before starting operation, see (page 90). 4 Forward Chapter Search Area Selects the next chapter. 5 Backward Chapter Search Area Selects the previous chapter. 6 DVD Disc Menu Control Buttons Area Displays the Disc Menu Control buttons (page 18).
Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen Displays the basic operation buttons on the screen. Switches to the source control screen to use various playback functions.
Watching DVD/VCD 9 Stops playing. When pressed twice, the disc is played from its beginning when you play it in the next time. p Selects a chapter, a scene or a track. When the VCD is paused, touch this button to start single-frame stepping. q Plays or pauses. w Slow Forwards or Backwards. (during DVD play) e Switches the Repeat Play operations in the following sequence.
Highlight Control You can select a chapter and title for the DVD Menu screen. When you touch the screen, you can select the DVD menu. Top Me n u Ctrl Menu Return q Switches the subtitle language. (during program playback only) w Switches the voice language. (during program playback only) e Displays the Zoom Control screen. r Clears the Disc Menu Control.
Watching DVD/VCD VCD Zoom Control Displays an enlarged VCD screen. 1 Display the Zoom Control screen Mode:Full DVD VCD DVD VCD Scene PBC VER2 Z o omC t r l AV–OUT:AV–IN 3 P ST IN 2 2 1 Z o om 0:05 AF 2 x2 2 3 Ex i t 1 Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. 2 Scrolls the screen in the direction you touch. 3 Clears the Zoom Control button.
Music Disc & Audio File Listening You can recall various control screens during CD/Audio file playback. • For the basic method of how to play a music disc/audio file, see (page 10). • See (page 7) for playable discs. • See (page 8) for playable files. Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions.
Music Disc & Audio File Listening During Audio file playback 18 20 19 21 22 23 24 24 26 27 26 28 28 29 30 31 34 25 32 33 35 36 37 38 39 40 i Switches to the playback screen. If there is no playback screen, wallpaper is displalyed. o Folder and File Number Display ; Play Mode Display a Play Time Display s Music information display Selects Folder Name, File Name, Title, Artist Name, or Album Name. When is appeared, the text display is scrolled by pressing it. d Ejects the disc.
Video File/Picture File Watching You can recall various control screens during playback of video file (MPEG 1 and MPEG 2 file) and picture file (JPEG file). Function During Playback Screen Basic functions are available even when the playback screen is displayed. 1 Display the playback screen ⁄ 5 JPEG: Picture Control Button Area (page 25) MPEG: Switches to the screen with subtitle language selection option and voice language selection option.
Video File/Picture File Watching Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen Displays the basic operation buttons on the screen. Switches to the source control screen to use various playback functions.
5 Video/Picture information display Selects Folder Name, File Name, Title, Artist Name, or Album Name. When is appeared, the text display is scrolled by pressing it. 6 Ejects a disc. 7 Fast Forwards or Fast Backwards. (Disabled when a JPEG is being played.) 8 Stops playing. When pressed twice, the disc is played back from its beginning in the next time. 9 Selects a file. p Plays or pauses. q Selects a folder. w Switches the button display.
Radio Listening Various control screens appear in the Tuner Source mode. • For the basic method of receiver button operations, see (page 10). • Set the remote controller mode switch to "AUD" mode before starting operation, see (page 90). Functions While Displaying the Control Screen Switches to the source control screen to use various functions.
Seek Mode 19 21 20 Sets a station selection. 20 o Memorized stations are displayed. Touch to tune in. ; Scrolls the list. a Switches the list display name to Station name or Program Service Name. The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually.
Radio Listening Auto Memory Manual Memory Stores stations with good reception in memory automatically. Stores the current receiving station in memory. 1 Select a band you wish to store in memory 1 Select a station you wish to store in memory 2 Select the Auto Memory mode 2 Store in memory 3 Start Auto Memory ⁄ Continue to touch until the memory number appears. Touch or . Auto Memory terminates when 6 stations are stored or when all stations are tuned in.
: Press for # seconds. Radio Text Set Station Name You can display the radio text. (Only when receiving the FM broadcast) Assigns a name to a station. 1 Tune in to the station to name 1 Select a station 2 Start Name set 2 Display the radio text 3 Enter the name See (page 46) for information on how to enter a name. 1 4 End Name set 2 2 1 Selects the Program Service Name, Title & Artist name, Station Name, Radio Text Plus, or Radio Text for text display.
Radio Listening Traffic Information Search for Program Type When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. A program is tuned when you set its program type. (Only when receiving the FM broadcast) 1 Enter Program Type mode 1 Set the Traffic information mode When the traffic bulletin starts... The Traffic Information screen appears automatically.
iPod Control You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP301V (optional accessory). You can also display video contents on this unit when connecting an iPod with video. Functions When Displaying the Easy Control Panel Connecting an iPod Connect an iPod to this unit. Displays the basic operation buttons on the screen.
iPod Control Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions. 14 When Video or picture is playing, press the [FNC] button. 15 Mode:Full iPod AV–OUT:AV–IN SCRN iPod 00002/00006 P IN 0:00:05 or [iPod] button on the "Source Select" screen 2 1 ⁄ 4 3 16 17 18 1 Image picture Switches to the playback screen. If there is no playback screen, wallpaper is displayed.
1 19 20 21 22 20 23 o Categories and music are listed. Touch a category name to move its lower level. If music title is displayed, the music is played by touching it. When is appeared, the text display is scrolled by pressing it. When is appeared, all the music in its category is played by touching the button. ; Switches list page. a Returns to previous category. s Moves to the top category. d Displays the currently playing category.
USB Device Control You can control and listen to songs in your USB device by simply connecting it to the USB connector of this unit. • For the connection of a USB device, see (page 10). Functions When Displaying the Easy Control Panel Functions While displaying the Control Screen Displays the basic operation buttons on the screen. Switches to the source control screen to use various playback functions.
2 1 4 3 5 7 6 10 11 8 12 13 9 14 15 16 ⁄ u Displays images in the folder currently being played one after another. If there is no image in the folder currently being played, initial background is displayed. For information on setting the image display time, see (page 64). i Displays the folder list. See (page 36). o Displays the list of category. ; Displays information screen of music being played. * Disabled during play list mode.
USB Device Control Folder Select Searches folders and Audio files stored in the USB device according to hierarchy. 1 Start Folder Select 2 Select music 1 2 3 4 2 5 6 1 Lists folders and Audio files Folder opens when touched, and the Audio file is played. 2 Scrolls the list. 3 Moves to the top hierarchy level. 4 Moves up a hierarchy level. 5 Moves to the top page of the list. 6 Displays the currently playing file.
Sirius/XM Control (North American sales area only) Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite radio connected only. To connect the Sirius tuner, a conversion cable CA-SR20V (optional accessory) is necessary and to connect the XM tuner, an XM interface Box KCA-XM100V (optional accessory) is necessary.) • This document uses the SIRIUS display as an example.
Sirius/XM Control (North American sales area only) Channel Search Channel Memory Specifying the desired category and selecting a channel. Stores the current receiving channel in memory. 1 Start Channel Search 2 Store in memory 2 Select a category 2 1 Select a channel you wish to store in memory 1 3 2 1 Selects a category. Displays all the channels in the selected category. 2 Scrolls the category. 3 Displays all the channels. Continue to touch until the memory number appears.
: Press for # seconds. Direct Channel Search Tuning in by entering the desired channel number. 1 Start Direct Channel Search 2 Enter the channel number 1 2 3 1 Enters the channel number. 2 Cancels the direct channel search. 3 Clears the channel number.
HD Radio Control Various control screens appear in the HD Radio Source mode. (with the optional accessory HD Radio tuner connected only) Functions While Displaying the Control Screen Switches to the source control screen to use various functions. 9 Switches the button display. p Selects the Auto Memory mode. Refer to (page 41) q Switches the Seek mode. See (page 41) w Switches the number of lines displayed in the Information Display.
Seek Mode Auto Memory Sets a station selection mode. Stores stations with good reception in memory automatically. 1 Select a band you wish to store in memory The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually.
HD Radio Control : Press for # seconds. Manual Memory Receive mode Stores the current receiving station in memory. Sets the radio broadcasts receive mode. 1 Select a station you wish to store in memory 2 Store in memory 1 Display the Receive mode screen 2 Select the receive mode 1 1 2 Continue to touch until the memory number appears. 42 1 The Receive mode switches in the following order. Auto: Automatically tunes to analog broadcast when there is no digital broadcast.
English 43
Bluetooth Audio Control You can listen to audio files stored in Bluetooth audio player and cell-phone. For DNX5140/DDX514/DDX5034, Bluetooth unit KCA-BT200 (optional accessory) is necessary. Before Use For DNX6140/DNX6000EX/DDX5034BT : • You need to register your audio player and cell-phone before using it with this unit. For more details, see (page 80). • If you have registered two or more audio players or cellphones, you need to select one of them.
Muting Audio Volume upon Reception of Phone call When the telephone is called, the system is paused automatically. Muting Audio Volume upon Reception of Phone Call When the telephone is called... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen When the call ends... ⁄ Hang up the phone. The system resumes playing automatically. • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory.
Character Entry When you select the Set Station Name mode or others, the following screen appears for character entry. How To Use the Character Entry Screen Character Entry screen 1 1 3 2 3 4 ⁄ 5 6 7 1 Shifts the cursor. 2 Enters characters. 3 Scrolls up or down the character button display. 4 Sets the key layout of the character buttons. abc : Alphabetical key layout. qwe : Qwerty key layout. 5 Enters a space. If you erase a character, locate the cursor on it and touch this button.
Screen Control Setting the monitor screen. Screen Control 1 Display Easy Control panel ⁄ • The Screen Control screen is displayed only when you have applied the parking brake. • The picture quality can be set for each source. • You can set image quality of screens such as menu from (page 72) of the . 2 Display the Screen Control screen Mode:Full DVD VIDEO Turning the Dimmer function On or Off according to the Navigation Day/Night display setting.
Hands Free Unit Control Various functions can be used in the Hands Free control mode. For DNX5140/DDX514/DDX5034, Bluetooth unit KCA-BT200 (optional accessory) is necessary. Before Use • To use the Phonebook, it must be downloaded to this unit in advance. For details, see (page 48). For DNX6140/DNX6000EX/DDX5034BT : • You need to register your cell-phone before using it with this unit. For more details, see (page 80).
2 3 4 5 6 7 8 9 p q w : Displays short message status. If a cellphone which supports SMS function is not connected, this mark does not appear. : There is unread short message. : There is no unread short message. : Downloading Phonebook. : Indicates there is a call on hold. : Displays the signal strength.* The more the number of bar segments, the stronger the signal.
Hands Free Unit Control Calling by Entering a Phone Number Quick Dialing Makes a call by entering a phone number. You can register up to 6 phone numbers for quick dialing. 1 Display the number input screen ⁄ • Phone numbers must be registered in advance. See (page 58). 1 Recall the phone number 2 Enter a phone number 1 2 Make a call 2 3 4 1 Calls the entered phone number. 2 Creates an SMS for the entered phone number. See (page 59).
Controlling Tone-based Services Calling by Phonebook Uses tone base service using DTMF (Dual Tone Multi Frequency). You can call a person using his/her phone number that you have registered in the Phonebook. 1 Display the DTMF input screen Display the Talking screen. See (page 50). 1 Display the Phonebook screen The Initial Input screen appears.
Hands Free Unit Control r Calls the selected phone number. t Creates an SMS for the displayed phone number. See (page 59). y Scrolls the phone number. u Displays the Phonebook data list. i Returns to the Hands-Free Control screen. Cyrillic alphabet search screen 5 2 2 3 5 Make a call 5 Displays the Phonebook beginning with the name whose first character you have touched.
Making a Call Using Outgoing/Incoming Call Records Calls by selecting a phone number from the outgoing or incoming calls list. ⁄ • The Outgoing Calls list screen or Incoming Calls list screen shows the list of the calls originated from or received at this unit. They are not the ones stored in the cell-phone memory. 1 Display the Outgoing Calls or Incoming Calls screen : Outgoing Calls : Incoming Calls The Outgoing Calls or Incoming Calls list screen appears.
Hands Free Unit Control Calling by Voice Recognition If you hear another Beep sound: Speak the key word within 2 seconds after the Beep, or touch the [Phonebook List] button to select the phone number. Calls by recognizing the registered voice. ⁄ • In order to perform voice recognition, voice must be registered in the Phonebook data. See (page 56). Or, to perform voice recognition by Phone number category (Home, Office, Mobile etc.
Setting Up the Hands-Free Phone The Hands-Free system can be set as follows. 1 Display the Hands Free Setup screen 2 Setup each item 1 2 3 4 5 6 ⁄ 5 Sets the beep of the incoming SMS. ( "ON") "ON": Beep is heard. "OFF": Beep is canceled. 6 Returns to the Hands-Free Control screen. 7 Returns to the "Hands Free Setup 1" screen. 8 Sets whether to use cell-phone phonebook, outgoing calls list and incoming calls list. ( "ON") "ON": Yes. "OFF": No. 9 Sets the SMS function. ( "ON") "ON": Use SMS function.
Hands Free Unit Control Voice Registration 5 End voice registration Registers voice for voice recognition in Phonebook. Up to 35 voices can be recorded in one cell-phone. 1 Select the name to register Go through the procedure of (page 51). ⁄ 1 • A message is displayed if the voice is not recognized. Read the message for the further operation. • Repeat from 1st try if the voice is different from the 1st try. 1 Selects a name.
Key Word Voice Registration 4 Utter the voice to register (1st try) Registers the voice to select the Phone number category by Voice Recognition. 7 1 Display the Key Word List screen Display the "Hands Free" screen and touch [Setup]. See (page 48). 6 6 Registers the voice. 7 Cancels voice registration. Utter within 2 seconds after the Beep.
Hands Free Unit Control p Deletes the currently displayed phone number. q Returns to the previous screen. Phone Number Preset Registers frequently used phone number to Hands Free control screen preset button. 1 Display the Hands Free Preset List screen Display the "Hands Free" screen and touch [Setup]. See (page 48). 4 Search phone number to register with each function 5 Register phone number ⁄ • Press [Delete] to delete the registered phone number.
SMS (Short Message Service) SMS Message screen Uses SMS function. 10 1 Display the SMS Select screen 11 12 13 12 p Calls the number in the selected message. q Creates a new message for the selected message. w Scrolls the message. e Returns to the previous screen. 2 Select a function 4 Create a message 1 2 15 14 3 4 5 1 Displays Received Message List. 2 Displays Sent Message List. 3 Displays the Message screen. If there is an unfinished message, the button will be active.
Setup Menu You can set up various receiver parameters. Setup Menu Audio Setup Displays the Setup menu to set various functions. You can setup a speaker network, etc. 1 Display the control screen of any source 1 Display the Audio Setup screen ⁄ Touch any source button on the "Source Select" screen. 2 Display the Setup Menu Touch Menu" screen (page 60). in the "Setup • [Audio Setup] cannot be selected under the following conditions: – When no source is selected.
Crossover Network Setup DVD Setup You can set a crossover frequency of speakers. You can set up the DVD play. 1 Select the speaker to set the crossover 1 Display the DVD Setup screen Touch Menu" screen (page 60). 1 1 2 2 in the "Setup 2 Setup each item 1 2 4 3 1 2 3 4 3 Sets the High Pass Filter of the front speaker. Sets the High Pass Filter of the rear speaker. Sets the Low Pass Filter of the sub woofer. Switches to the crossover setup screen.
Setup Menu 6 7 8 Language Setup Selects a language you use for the speech and menus. 9 1 Select the language item to set 10 ⁄ 6 Returns to the "DVD Setup 1" screen. 7 Sets an angle mark display.*1 ( "On") 8 Selects the screen display mode.*1 ( "16:9") "16:9": Displays wide pictures. "4:3 LB": Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen). "4:3 PS": Displays wide pictures in the Pan & Scan format (showing pictures cut at the right and left ends).
Parental Level Setup 4 Select a parental level and complete the setup Sets a parental level. 1 Display the Parental Level code number screen 6 See (page 61) and touch [Parental Level]. 6 7 ⁄ 2 Enter the code number 1 2 6 Selects a parental level. 7 Complete the parental level setup and returns to the "DVD Setup 2" screen. • If a disc has higher parental lock level, you need to enter the code number. • The parental lock level varies depending on a loaded disc.
Setup Menu System Setup 6 7 8 You can set up the system parameters. 9 1 Display the System Setup screen Touch Menu" screen (page 60). in the "Setup 2 Setup each item 1 2 3 4 5 ⁄ 1 Moves to the "System Setup 2" screen. 2 Turns the key touch tone On or Off. ( "ON") 3 Allows scrolling of text display on the Source Control screen. ( "Auto") "Auto": Scrolls the screen automatically. "Manual": Allows you to scroll the screen manually. 4 Selects a remote control signal.
: Press for # seconds. t Selects a picture display time. ( "Long") The Display of a JPEG picture is changed. ("Short", "Middle", "Long") 4 Adjusts the Blue value. 5 Returns to the "Panel Color Coordinate" screen. 3 Select a Preset number to register Panel Color Coordinate Sets the screen and button illumination color. 1 Display the Panel Color Coordinate screen Adjusted color is registered to the selected Preset button. 4 Complete the color coordination See (page 64).
Setup Menu AV Interface Setup 5 6 7 You can set audio and visual (AV) interface parameters. 8 9 1 Display the AV Interface screen 10 Touch Menu" screen (page 60). in the "Setup 2 Setup each item 1 2 3 4 1 Moves to the "AV Interface 2" screen. 2 Sets a name to be displayed when you select a system that is connected via the AV INPUT port. ( "VIDEO") 3 Sets an image display of the system that is connected via the AV INPUT port.
11 12 13 14 15 q Returns to the "AV Interface 2" screen. w Selects speakers used for voice guidance of the navigation system. ( "Front LR") "Front L": Uses the front left side speaker for voice guidance. "Front R": Uses the front right side speaker for voice guidance. "Front LR": Uses both front speakers for voice guidance. e Adjusts the volume for voice guidance of the navigation system.
Setup Menu User Interface You can set up user interface parameters. 1 Display the User Interface screen Touch Menu" screen (page 60). in the "Setup 2 Setup each item 1 2 3 4 1 Moves to the "User Interface 2" screen. 2 Selects the background to display. "Change": Displays images entered into this unit. See (page 71). 3 Enables entering or deleting of background images into or from this unit. Press to enter the USB suspend mode, and then remove the USB device.
14 15 16 Direct Source Button Setup Registers the source displayed in the favorite source screen. 1 Displays the Direct SRC button Setup screen r Returns to the "User Interface 3" screen. t Sets whether to display the name of the , , , and buttons on the right side of the menu screen. y Registers the source displayed in the favorite source screen. See (page 69). See (page 68).
Setup Menu Entering Background Background Delete Loads a image for background. Deletes the background image. 1 Connect the device which has the image to load 1 Delete the image you have loaded 2 Display the User Interface screen Touch Menu" screen (page 60). in the "Setup 3 Display the Background Memory screen 2 Confirm 1 4 Select the image to load 2 1 Returns to the "User Interface" screen. 3 ⁄ 4 • This operation is not possible when USB/DVD is selected as the source.
Background Select Touch Panel Adjustment Selects a image for background. You can adjust the touch panel operations. 1 Select Background Change screen 1 Display the Touch panel Adjustment screen Touch Menu" screen (page 60). in the "Setup 2 Start Touch panel setup 2 Select a image for background 2 1 3 Adjust the Touch panel 1 Returns to the initial background. 2 Returns to the original screen. 1 2 3 Set the image as the background Follow the instruction on the screen and touch the center of .
Setup Menu Clock Setup Monitor Setup You can adjust the clock time. You can adjust the position, picture quality and the screen mode of the monitor. 1 Display the Clock Setup screen Touch Menu" screen (page 60). in the "Setup 1 Displaying the Monitor SETUP screen Touch Menu" screen (page 60). 2 Setup the Clock in the "Setup 2 Setup each item 2 1 3 2 1 2 3 4 3 5 4 1 2 3 4 Clock time display Adjusts hours. Adjusts minutes. Sets "00" minute.
8 Selects a screen mode of the DVD playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" 9 Selects a screen mode of the iPod VIDEO playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" p Selects a screen mode of the USB playback screen. You can select any of the following screen mode.
Setup Menu Security Code Setup 4 Register your security code You can set a security code to protect your receiver system against theft. ⁄ • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice. 1 Display the Security Code Setup screen Touch Menu" screen (page 60).
If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code Deactivating Security Code To deactivate the Security Code function. 1 Display Security Code Setup screen Touch Menu" screen (page 60). in the "Setup 2 Start to cancel a registration of the Security Code You must enter the same security code as that you have entered in Step 3. 2 Enter the security code 3 Enter a security Code Now, you can use your Receiver.
Setup Menu iPod Setup Sirius Setup Performs setup when using iPod. You can set up the Parental lock for Sirius. 1 Display the iPod Setup screen Touch Menu" screen (page 60). in the "Setup 1 Display the Sirius Setup screen Touch Menu" screen (page 60). in the "Setup 2 Setup each item 1 1 2 2 3 ⁄ 1 Sets the Audio Book playback speed. 2 Sets Wide Screen on or off. • "Wide Screen" cannot be set while the iPod is connected. 76 1 Sets the Parental lock code.
Sirius Parental Code Setup 4 Confirm the code number Sets a Sirius Parental code. 1 Display the Parental Code screen Enter the same code number as you input in step 3. Sirius Parental code is now set, and the display returns to SIRIUS Setup screen. ⁄ • If you have already completed the code registration, is displayed. • If you to clear the code which has already registered, press . 2 Enter the current code number 1 2 3 4 5 ⁄ 1 Enters a code number.
Setup Menu Sirius Parental Lock Setup Sirius Parental Lock Channel Select Sets a Sirius Parental Lock function on or off. Selects the channel to enable Sirius Parental lock function. 1 Display the Parental Code screen 1 Display the Parental Code screen ⁄ • You need to complete beforehand. 2 Enter the code number 2 Enter the code number Enter the same code number as you input in .
Bluetooth Setup 4 Set the parental lock for each channel 7 5 6 Registers and selects Bluetooth unit. 1 Display the Bluetooth Setup screen 6 8 9 10 11 5 Lists the channel. The channel name scrolls by pressing . 6 Scrolls the channel list. 7 Sets the Parental lock function on or off for each channel. You need to input the Parental code to switch the Parental lock function on or off. 8 Displays the sort sequence 9 Switch the sort sequence of the channel list.
Setup Menu Registering Bluetooth Unit 4 Enter PIN code Registers the Bluetooth unit to be connected. Enter the PIN code specified for the Bluetooth unit to register. 1 Display the Connect Device List screen 12 13 14 15 w e r t 2 Search for a Bluetooth unit 1 2 3 4 5 ⁄ Enters a code number. Cancels registration of PIN code. Enters PIN code. Clears the code number. 1 Displays the registered Bluetooth unit. Displays the busy service in red. Displays the available service in gray.
Registering Bluetooth Unit PIN Code Registering Special Bluetooth Unit Sets the PIN code of this unit (DNX6140/ DNX6000EX/DDX5034BT only) or KCA-BT200 to enter when registering (pairing) from the cellphone or audio player side. Registers Special Bluetooth unit that results in error by normal operation by selecting from model name.
Setup Menu Bluetooth Unit Connection Deleting Bluetooth Unit Selects the Bluetooth unit to connect. Deletes the registered Bluetooth unit. 1 Display the Connect Device List screen 1 Display the Connect Device List screen 2 Select a registered Bluetooth unit 2 Select a Bluetooth unit to delete 1 2 3 1 Displays the registered Bluetooth unit. 2 Scrolls the name of the Bluetooth unit. 3 Returns to the previous screen.
Software Information Checks the software version of this unit. 1 Display the Software Information screen Touch Menu" screen (page 60). in the "Setup 1 2 3 1 2 3 4 4 Displays the software keycode. Displays the software version. Displays the Bluetooth firmware version. Uses for Bluetooth firmware update.
Setup Menu Setup Memory 3 Memorize or recall the settings Audio Set Up and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Display the Setup Memory screen Touch Menu" screen (page 60). in the "Setup When memorizing the Audio Setup and AV Interface settings: If settings have already been memorized, a confirmation message appears. Touch .
English 85
Audio Control Audio Control Menu Audio Control Displays the Audio Control menu to set the sound effect function of this unit. You can adjust the front/rear and right/left audio balance. 1 Display the control screen of any source 1 Display Audio Control screen Touch in the "Audio Control Menu" screen (page 86). 2 Set the each item 1 4 5 2 6 Touch any source button on the "Source Select" screen.
⁄ 9 Adjusts the volume of the present source based on the difference level of original volume. • If you have increased the volume first, then reduced the volume using the "Vol. Offset", the sound generated if you suddenly switch to another source may be extremely loud. Equalizer Control You can set up the equalizer. 1 Display Equalizer Control Touch in the "Audio Control Menu" screen (page 86). 2 Display the Equalizer screen 1 2 3 ⁄ 1 Selects an equalizer curve type.
Audio Control Tone Setup Zone Control You can set a Tone curve. You can set the front and rear audio source. 1 Display the Tone screen 1 Display Zone Control Touch in the "Audio Control Menu" screen (page 86). 1 See (page 87). 2 Set the Tone 1 2 5 3 6 4 7 1 Displays the current source. 2 Set the Zone Control 2 8 9 3 1 2 3 4 5 6 7 Tone curve becomes flat. Bass adjustment items are displayed. Middle adjustment items are displayed. Treble adjustment items are displayed.
set to "Front", "DVD" or "USB", the same source screen or control screen is displayed in the rear monitor. See (page 66).
Remote Controller For DDX5034/DDX5034BT : This unit can be operated using the Remote Controller (RC-DV340) supplied with this unit. For DNX6140/DNX6000EX/DNX5140/DDX514 : Optional Remote Controller KNA-RCDV330 is designed for controlling this unit. ¤ • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving.
ENTER V.SEL FNC/PBC MENU DVD SETUP RETURN AUDIO SUBTITLE ANGLE ZOOM Volume control Adjusts the volume. T V• O SRC MODE DVD• O DISP TOP MENU O AUD• O Source switching Switches to the source to be played. Cursor key Moves the cursor when displaying menu. O Common operations (AUD mode) AM− FM+ OPEN ENTER Enters options. O O O FM+ ENTER OPEN D O FM+ OPEN 2 ZONE Volume attenuator Press the key once to lower the volume.
Remote Controller DVD/VCD/CD/Audio files (DVD mode) CD Folder search Selects the folder to be played. Track number Play time Cancel O O AM− FM+ D Y OPEN VOL 1 2ABC 3 DEF 1 Audio files O 2 ZONE Track search and file search Selects the track or file to be played. Folder number File number Cancel VCD 1.X, VCD 2.X (PBC OFF) O O AM− FM+ D Y OPEN VOL 1 O 2ABC 3 DEF 1 2 ZONE Track number Cancel VCD 2.X (PBC ON) Play/Pause Pauses the track.
DVD Menu Displays the DVD menu. Turns the playback control on or off while playing VCD. Radio (AUD mode) Band switching Switches to bands received by the unit. O DISP O SRC V.SEL MODE FNC/PBC TOP MENU MENU DVD SETUP RETURN AUDIO SUBTITLE ANGLE ZOOM AM− FM+ D Y VOL 1 OPEN 1 SUBTITLE Switches the subtitle language. O 2ABC 3 DEF 2 ZONE Station selection Switches to broadcast stations received by the unit. DISP SRC O V.
DVD Language Codes 94 Code Language Code Language Code Language aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gli gn gu ha he hi hr hu hy ia ie ik id Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian
English 95
Help? Troubleshooting Some functions of this unit may be disabled by some settings made on this unit. ! ! • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter. • Cannot set up the high pass filter. ▲ Subwoofer is not set to On. ☞
English 97
Help? Error When the unit fails to operate correctly, the cause of the failure appears on the display. Protect : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. ➡ Wire or insulate the speaker cord as appropriate and then push the Reset button (page 6). Hot Error : When the internal temperature of this unit rises to 60°C or more, the protection circuit is activated and you may not be able to operate the unit.
Check Sirius: The unit cannot recognize the connected Sirius Tuner Box. ➡ Check the connection of the Sirius Tuner Box. CH UNAUTHORIZED: The selected channel is not subscribed. OFF AIR: The broadcast of the selected channel has finished. Antenna Error: Something is wrong with the anntena. ➡ Check the connection of the antenna. Acquring Signal: The unit cannot receive any signal. ➡ Move the vehicle to the area where the unit can receive signal. Updating Firmware: Updating the firmware of Sirius tuner.
Specifications Monitor section USB interface section Picture Size : 6.1 inches (diagonal) wide : 136.1 mm (W) x 72.0 mm (H) Display System : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 336,960 (480H x 234V x RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : Cold Cathode Fluorescent Tube USB Standard : USB 1.1/ 2.
Video Output Level (RCA jacks) : 1 Vp-p/ 75 Ω Audio Output Level (RCA jacks) : 1.2 V/ 10 kΩ Analog RGB input (DDX514/DDX5034/DDX5034BT only) : 0.7 Vp-p/ 75 Ω Audio section Maximum Power (Front & Rear) : 50 W x 4 Full Bandwidth Power (Front & Rear) (4 Ω, 14.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners. The "AAC" logo is a trademark of Dolby Laboratories. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc.
2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J.
