Specifications

7
EN
5. Installation and Initial Startup
Before installation, please inspect the unit. Be sure that nothing is
damaged.
I: Placement & Storage Conditions
Install the UPS in a protected area that is free of excessive dust and has
adequate air flow around the unit, and is free from excessive dust, corrosive
fumes and conductive contaminants. Please place the UPS away from other
units at least 20 cm to avoid interference. Do NOT operate the UPS where
the temperature exceeds 0-40° C and the humidity is over 0-90 % RH.
II: Connect to Utility and Charge
Plug in the AC input cord to the 2-pole, 3-wire grounded wall outlet. For the
best results, we suggest charging the battery at least 6 hours with no load
(no electrical devices such as computers, monitors, rtc.) connected before
initial use. The unit charges its battery while connecting to the utility.