Specifications

8
EN
III: Connect the Loads
Plug in the loads to output receptacles on the rear panel of the UPS. Simply
turn on the power switch of UPS unit, and devices connected to the UPS will
be protected by UPS unit.
IV: Connect LAN cable, Modem or Phone line for Surge Protection
Connect for example a single modem or phone line into surge-protected “IN”
outlet on the back panel of the UPS unit. Connect from “OUT” outlet to the
computer with another phone line cable.
V: Connect USB Cable
To monitor the UPS status, such as unattended UPS shutdown and start-up,
by using bundled software, please connect the UPS and PC with USB cable
included.
Do not attach a power strip or surge suppressor to the UPS.