Specifications

1
EN
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS – This manual contains important instructions
for models PowerWalker VI 500T/HID, 750T/HID, 1000T/HID, 1500T/HID
that should be followed during installation and maintenance of the UPS and
batteries.
 This product is specially designed for PCs and it is not recommended for
use in any medical equipment, life-supporting system and other specific
important equipment.
 Do not plug household appliances such as hair dryers, microwave ovens
or vacuum cleaners to UPS.
 Do not attach a power strip or surge suppressor to the UPS.
 Do not plug the UPS into its own output.
 Connection to any other type of receptable other than two-pole, three-wire
grounded receptacle may result in shock hazard as well as violate local
electrical codes.
 To reduce risk of overheating the UPS, do not cover the UPS´ cooling
vents.
 This unit intended for installation in a controlled environment (temperature
controlled, indoor area free of conductive contaminants). Avoid installing
the UPS in locations where there is standing or running water or
excessive humidity and do not use it in any of the following environments:
o Any area with combustible gas, corrosive substance or heavy dust.
o Any area with extraordinarily high or low temperature (above 40˚C or
below 0˚C) and humidity of more than 90%.
o Any area exposed to direct sunshine or near any heating apparatus.
o Any area with serious vibrations.
o Outdoor.
 The utility power outlet shall be near the equipment and easily accessible.
In the event of an emergency, press OFF button and disconnect the
power cord from the AC power supply to properly disable the UPS.