Product Literature
Table Of Contents
Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.
13
Hinges
Overlay
Frame
Frameless
Partial/twin overlay
Frameless
Frameless
Building both frame and panel cabinets
Frame
Frameless
hinge (73B35XX)
plate (any 0 mm plate)
Straight-arm Soft close
Screw-on
73B3550
Press-in
73B3580
INSERTA
73B3590
EXPANDO
73B358E
Minimum reveal table
3 0.5 1.0 1.8 2.7 4.3
4 0.5 1.0 1.7 2.5 3.8
4.5 0.5 1.0 1.7 2.5 3.6
5 0.5 0.9 1.7 2.4 3.4
6 0.5 0.9 1.6 2.3 3.2
7 0.5 0.9 1.6 2.2 3.0
B
=
boring
distance
16 19 22 24 26
T
=
door thickness
H Overlay P S
0 16 17 17. 5 18 19 20 10
20
3 13 14 14.5 15 16 17 13
23
4.5
11.5 12.5 13 13.5 14.5 15.5 14.5
24.5
6 10 11 11.5 12 13 14 16
26
9 7 8 8.5 9 10 11 19
29
3 4 4.5 5 6 7
Fixed
distance
=
13
B = boring distance
NOTE: 4.5 plate is only for use in frame
cabinets, 9 plate is only for frameless
cabinets
H Overlay P S
9 7 8 8.5 9 10 11 19
29
3 4 4.5 5 6 7
Fixed
distance
=
13
B = boring distance
H Reveal W P S
9
2 – – – – – 16
19 29
5 3 2 – – – 19
8 6 5 4 – – 22
3 4 4.5 5 6 7
B = boring distance
▀ BLUMOTION integrated into the hinge cup
▀ Deactivation switch for small/light doors
▀ For door thicknesses up to 26 (1")
▀ Overload safety feature
▀ For door overlays up to 22 mm
▀ 86° angle restriction clip available (70T3553)
▀ Compatible with existing CLIP mounting
plates and hinge arm cover caps
Straight-arm Soft close
Screw-on
73B3550
Press-in
73B3580
INSERTA
73B3590
EXPANDO
73B358E
same boring distance
Features
H
W
B
overlay
66.5
T
13
H
B
overlay
T
66.5
13
W
B
reveal
37
13
66.5
T
H H
H
W
B
overlay
37
T
66.5
13
4.5
4.5
13
(1/2")
4.5
17.5 (11/16")
0
CLIP top BLUMOTION 110
°
+
Thickness greater than 26 trial recommended
Abbreviations
H = Plate height
P = Door protrusion
S = Side arm protrusion
W = Side panel width
The most common overlays for frame and
panel cabinets can be achieved by using the
same machine setting for hinge cup boring.
Bore all doors at 4.5 mm to achieve:
▀ 13 (1/2") overlay on frame cabinets
▀ 17.5 (11/16") overlay on panel cabinets
Advantages:
▀ One machine setting for boring all doors
▀ Same hinge used for both applications
hinge (73B35XX)
plate (175H6040)
NOTE: See page 57 for angle restriction clip instructions and details