Product Literature

© 2019 Blum, Inc. Subject to technical modifications without notice
6
Hinges
Cycle test
Without load
▀ 200,000 opening
and closing cycles
for all CLIP hinges
Positive test result
With load
▀ 11 lb extra weight is
applied for 100,000
opening and closing cycles
Positive test result
Load test
Static load
▀ 67 lb applied ten times for
five seconds, each at 45°
opening angle
Positive test result
Dynamic load
▀ 44 lb extra weight applied
for fifty opening and
closing cycles
Positive test result
Over push test
Without load
▀ CLIP hinges – Increasing forces up to 11 lb applied for a total of five
times for a total of five seconds each
Positive test result
Conditions for Tests
Blum, Inc. does a great deal of testing to ensure that the quality of our hardware is consistent with the usual high
standards that our customers have come to expect from Blum. For this reason we have rigorous testing procedures
which are carried out from the development stage through production. Blum’s internal testing standards are based on
practical applications of our products and are more stringent than what is required by ANSI/BHMA.
NOTE: All Blum hinges meet or exceed ANSI/BHMA A156.9 Grade 2 requirements. All concealed hinges are
designed for indoor use.
CLIP Testing Standards
kg
kg
Cycle test
Specifications
▀ Door size – 23-5/8" height, 23-5/8" width, 3/4" thickness
▀ Door weight –14.3 lb for cycle tests
▀ Door weight – 18.5 lb for load and over push tests
▀ Boring distance – 5 mm
Distance between
hinges
▀ 16-15/16"
Hinge and mounting
plate attachment
▀ Hinges are mounted to test blocks and attached to test door and stand with clamps
▀ Test blocks for door: Particle board
▀ Test blocks for mounting plate: Particle board
ISO 9001
Blum, Inc. is ISO 9001 certified which means
that you are assured of consistent quality in every
Blum product.
ANSI/BHMA
All Blum runners meet or exceed ANSI/BHMA
A156.9 Grade 1 requirements. Contact your local
Blum representative for more details.