Product Literature

© 2019 Blum, Inc. Subject to technical modifications without notice
98
Hinges
Mounting plate template
▀ For pre-boring TIP-ON for doors wing and in-line adapters
▀ Can also be used to bore for wing (37 mm) and in-line (20 mm)
mounting plates
▀ Additional hole location added (37 mm) for in-line adapter for
standard doors
▀ Simple location of adapter and mounting plate screw positions
▀ Pilot bore Ø2.5 mm holes for wood screws
Part no.
Mounting plate template
65.5300*
Knock-in tool
▀ Can be used to insert all Blum press-in hinges
Part no.
Knock-in tool
ZME.0710
ECODRILL
▀ Simple device for boring Blum hinge pattern
▀ Driven by electric/cordless drill (18v or higher)
▀ Boring distance adjusts from 2 mm to 8 mm
▀ Clamps to various door thicknesses up to 40 mm
▀ I ncludes drill bits (pre-installed) and two Torx bits
Part no.
ECODRILL
M31.1000
Accessories
Replacement Ø35 mm bit
M31.ZB35.02
Replacement Ø8 mm bit
M31.ZB08.02
Tool set
MZW.1300
ECOJIG
▀ Used to bore Ø5 mm holes for mounting plates that are
mounted with system screws, EXPANDO dowels or INSERTA
▀ Also can be used to pre-bore Ø5 mm holes for EXPANDO
BLUMOTION adapters
▀ Ø5 mm stop collar included
Part no.
ECOJIG
65.5070
Universal individual template
▀ For pre-boring mounting plates
▀ Also used for marking and pre-boring cabinet profiles,
BLUMOTION, TIP-ON adapter plates and AVENTOS
locating pins
▀ Calibrated scale for accurate setting
Part no.
Universal individual template
65.1051.02
Ø8
45
9.5
Ø35
B
door
C
in-line
wing
20
32
37
32
holes are:
32 mm apart,
37 mm setback
37
32
Assembly Aids