Product Literature

Dimensions in millimeters (inch equivalents as noted) © 2019 Blum, Inc.
97
Hinges
Machine drill bits
Part no.
Ø5 mm drill bit (right handed)
M01.ZB05.D2 R
Ø5 mm drill bit (left handed)
M01.ZB05.D3 L
Ø8 mm drill bit (left handed)
M01.ZB08.03 L
Ø10 mm drill bit (right handed)
M01.ZB10.02 R
Ø10 mm drill bit (left handed)
M01.ZB10.03 L
NOTE: Machine drill bits need to be set to 57 mm in
length to achieve proper bore depth.
Ø10 mm drill bit for mineral composites/HPL (right handed)
M01.ZB10.T2 R
Ø10 mm drill bit for mineral composites/HPL (left handed)
M01.ZB10.T3 L
Ø20 mm drill bit (right handed)
M01.ZB20.02 R
Ø35 mm drill bit (right handed)
M01.ZB35.02 R
Euro hinge insertion ram
▀ Can be used for inserting
CLIP top BLUMOTION, CLIP
top and CLIP press-in hinges
▀ Not for use with wide angled
or specialty hinges
NOTE: Can be used with CLIP top BLUMOTION 95°, CLIP top 95°
and CLIP 100° by adjusting the ball plungers
Part no.
#10 insertion ram
MZM.0010.01
Euro hinge insertion ram
▀ Can be used for inserting Blum wide angle press-in hinges
#18 insertion ram
MZM.0018
Twist drill bits – high speed steel
Part no.
VPB-5 centering bit
VPB-5
Ø2 mm left
DB-2mm
Ø2.5 mm right
DB-2.5mm
Ø5 mm right
DB-5mm
Ø8 mm right
DB-8mm
Ø10 mm right
DB-10mm
*Used to pilot bore for screw-on hinges with MINIPRESS or MINIDRILL Ø10 mm chuck for DB-2 mm
DB-10 x 2mm
Twist drill bit
*Chuck for DB-2 mm
VPB-5
Ø5 mm
Ø8 mm
Ø10 mm
Ø35 mm
Euro hinge insertion ram
▀ Can be used for inserting most Blum
press-in Euro hinges
NOTE: Not for use with 170°, 155° and
125° wide angle hinges
Part no.
#40 insertion ram
MZM.0040
COMPACT hinge insertion ram
▀ Can be used for inserting all Blum
COMPACT press-in hinges
#47 insertion ram
MZM.0047
Mounting plate insertion Ram
▀ MINIPRESS insertion ram for press-in,
in-line mounting plate 177H3100
#53 insertion ram
MZM.0053
Machine Accessories
Part no.
Machines
& accessories