Installation Sheet
8
Subject to technical modifications
without notice. © 2010
Assembly
Finalize the tension adjustments
13
Close and flush doors to cabinet. Open and close door to test closing force. Open door
and adjust tension screws on both lift mechanisms with a power drill. Test door again
and repeat until desired function is achieved.
Tension adjustment should be the same on both lift mechanisms.
21
Use #2x2 POZI bit
Lock telescopic arms
12
1. Close and flush doors to cabinet. While
pressing on the bottom of the top door, pull
the bottom door open one inch.
1
2
2. Slightly open door and lock the
telescopic arms into position using the
levers as shown.
Open door
enough to
lock levers