Installation Sheet

8
Subject to technical modifications
without notice. © 2010
Assembly
12
Finalizing the door adjustments
1. Adjust each top door hinge and mounting plate
to properly align the top door to the cabinet.
2. Adjust each bottom door hinge and mounting
plate to properly align doors to the cabinet and
to the top door.
± 2 mm± 2.5 mm ± 2 mm± 2 mm± 3 mm + 3/- 2 mm
1 2
Adjust tension of the mechanism
11
Close and flush doors to cabinet. Open and close door to test closing force. Use a screw gun and a #2x2 POZI
driver bit to adjust the lift mechanism to the desired tension. Test door again and repeat until desired function
is achieved.
Tension adjustment should be the same on both lift mechanisms.
2
1
Although not illustrated here, telescopic arm mounting plates can also be adjusted horizontally ± 2 mm if needed.