Installation Guide

© 2015 Blum, Inc. Subject to technical modifications without notice
16
AVENTOS HK-XS
Planning specifications
for TIP-ON
NOTE: Designed to be used in a lift up application only
Lift mechanism
Y
=
137
+
D
+
K
Door mounting plate
Attach using #6 x 5/8" (606N/P) wood screw
Space requirements
*Minimum top reveal based on hinge
used. Please see minimum reveal
specs in Concealed hinges brochure
Z
=
(Door height minus A) x 0.3
Door thickness (mm) 16 19 22 24
A (mm) 45 34 23 15
Cornice and crown molding clearance
Door thickness (mm) 16 19 22 24
X (mm) 45 34 23 15
Opening angle
=
105° CLIP top free swing
15.5+OL
126+D+K+OL
32
Y
32
37
Abbreviations
D
=
Mounting plate height
K
=
Hinge arm crank
OL
=
Overlay
K
=
Hinge arm crank
Straight arm crank
=
0 mm
Half cranked arm
=
9.5 mm
Full cranked arm
=
18 mm
Cabinet and door mounting plate locations for panel applications
TIP-ON for AVENTOS specifications
Pre-boring Ø2.5 mm countersunk pilot holes are required
2.5 (3)* min.
50 (76)* min.
overlay
7.5
*For door heights greater than 400 mm
use 956A1004
Screw-on catch plate
200 minimum
125 minimum
1.5 minimum
27
*
Door thickness
Opening angle
Z
Door height
Door thickness