Installation Guide

© 2015 Blum, Inc. Subject to technical modifications without notice
8
AVENTOS HK-XS
Planning specifications
for face frame and panel
Lift mechanism
*Location when using COMPACT 39/38C
**Location when using COMPACT 38N
NOTE: When using CLIP top
BLUMOTION hinges in a face frame
application, you will need to use the
calculation below:
Y
=
137
+
D
+
K
Lift mechanism
Y
=
137
+
D
+
K
Door mounting plate
Attach using #6 x 5/8" (606N/P) wood screw
Door mounting plate
*Location when using COMPACT hinges
When using large overlay mounting plate
(20K4501) hole location is offset by
19 mm (15.5
+
OL
-
19)
NOTE: When using CLIP top
BLUMOTION hinges in a face frame
application, you will need to use the
calculation below:
126
+
D
+
K
+
OL
Attach using #6 x 5/8” (606N/P) wood screw
Space requirements
*Minimum top reveal based on hinge
used. Please see minimum reveal
specs in Concealed hinges brochure
Z
=
(Door height minus A) x 0.3
Door thickness (mm) 16 19 22 24
A (mm) 45 34 23 15
Cornice and crown molding clearance
Door thickness (mm) 16 19 22 24
X (mm) 45 34 23 15
Opening angle =
105° CLIP top BLUMOTION
100° COMPACT BLUMOTION
162*/178**
9.5
32
134*32
15.5+OL
15.5+OL
126+D+K+OL
32
Cabinet and door mounting plate locations for face frame applications
Cabinet and door mounting plate locations for panel applications
Y
32
37
Abbreviations
D
=
Mounting plate height
K
=
Hinge arm crank
OL
=
Overlay
K
=
Hinge arm crank
Straight arm crank
=
0 mm
Half cranked arm
=
9.5 mm
Full cranked arm
=
18 mm
NOTE: Designed to be used in a lift up application only
Z
Door height
Door thickness
200 minimum
125 minimum
1.5 minimum
27
*
Door thickness
Opening angle