Installation Sheet

2
Subject to technical modifications
without notice. © 2010
Risk of injury from spring-loaded arm
Do not push arm assembly down or leave in the down position
Remove mechanism before installing or removing cabinet
Assembly
AVENTOS boring template is available for pre-boring 5 mm locating pins
WARNING
Use the AVENTOS template to pre-bore the
locating pin holes for the AVENTOS HK
lift mechanism
After aligning the lift mechanism with the
cabinet using the locator pins, attach the
mechanism with the three mounting
screws provided
1
Locating pin locations and minimum depth
Part no.
65.5020
2
Attaching the lift mechanism
77
128
261
5
37
68.5
128
Z
261
5
Panel Face frame
Overlay up to 28
32 35
Z
37 35 33
NOTE: Face frame cabinets must be blocked out
flush with the frame.
#7 x 35 mm (1-3/8") wood screws (qty 3)