Installation Sheet

2
Subject to technical modifications
without notice. © 2010
88
225 min.
min 278
min 56
37
192
5
88
225 min.
min 278
min 56
37
192
5
Assembly
Universal individual template is available for pre-boring 5 mm locating pins
Risk of injury from spring-loaded arm
Do not push arm assembly down or leave in the down position
Remove mechanism before installing or removing cabinet
WARNING
█ Use the Universal individual template to pre-
bore the locating pin holes for the AVENTOS
HL lift mechanism
█ After aligning the lift mechanism with the
cabinet using the locator pins, attach the
mechanism with the five mounting
screws provided
1
Locating pin locations and minimum depth
Part no.
65.1051.01
2
Attaching the lift mechanism
PanelFace frame
NOTE: Face frame cabinets must be blocked
out flush with the frame
#7 x 35 mm (1-3/8") wood screws (qty 5)