Installation Sheet

6
Subject to technical modifications
without notice. © 2010
Removal
Risk of injury from spring-loaded arm
Do not push arm assembly down or leave in the down position
Remove mechanism before installing or removing cabinet
WARNING
3
Remove the stabilizer rod
Pull back the stabilizer rod cover caps and loosen the locking screws on each end of the stabilizer
rod. Remove the stabilizer rod from the cabinet.
1
2
3
Remove the cover caps and cover plate.
2
Remove the covers
1
Removing the door
Cover plate
Open the door. Support the door with one
hand and push down on tab to disengage the
CLIP mechanisms on the arm assemblies of
the mounting plates.
1
2
Lift the door off the mounting plates.