Manualshelf

Installation Sheet

ManualsBrandsBlum ManualsLift SystemsBlum AVENTOS HL Face Frame Cabinet Lift Mechanism Set for Door Weights of 19 - 44 Pounds
12345678
3
Subject to technical modifications
without notice. © 2010
Risk of injury from spring loaded arm
3
Attaching the arm assembly
NOTE: Before starting, see safety note on page 2
Find the right and left arm assemblies and
match them to the correct side of the cabinet
4
Attaching the stabilizer rod
After cutting the rod to size, slide the stabilizer arm cover caps onto the rod. Insert the stabilizer
rod adapters being careful to line up the tabs (shown with dotted lines). Attach the rod assembly
to each arm assembly and tighten the locking screw.
Cut the stabilizer rod to fit the cabinet.
Length = Interior cabinet opening minus 122 mm
A
B
Attach the arm assembly to the lift mechanism
as shown in illustrations A and B.
Lift up on the arm assembly to lock into place.