Manualshelf

Installation Sheet

ManualsBrandsBlum ManualsLift SystemsBlum AVENTOS HL Face Frame Cabinet Lift Mechanism Set for Door Weights of 19 - 44 Pounds
12345678
5
Subject to technical modifications
without notice. © 2010
7
Adjusting the lift mechanism tension
8
Adjusting the door
Use a screw gun and the supplied #2x2 POZI driver bit to adjust the lift mechanism to the
desired tension.
9
Attach covers
Use a POZI screwdriver to adjust cam adjustments for each of the three-dimensional
adjustments. Tension should be the same on both lift mechanisms.
Snap the symmetrical cover caps on each cover plate. Place the left and right cover plates
over the appropriate lift mechanisms and snap them in place.
± 2 mm± 2 mm± 2 mm