Installation Sheet

Subject to technical modiﬁcations

Attaching the stabilizer rod

After cutting the rod to size, slide the stabilizer arm cover caps onto the rod. Insert the stabilizer

rod adapters being careful to line up the tabs (shown with dotted lines). Attach the rod assembly

to each arm assembly and tighten the locking screw.

Cut the stabilizer rod to ﬁt the cabinet.

Length = Interior cabinet opening minus 122 mm

Risk of injury from spring loaded arm

Attaching the arm assembly

NOTE: Before starting, see safety note on page 2

Attach the arm assembly to the lift mechanism

as shown in illustrations A and B.

Lift up on the arm assembly to lock into place.

Find the right and left arm assemblies and

match them to the correct side of the cabinet