Manualshelf

Installation Sheet

ManualsBrandsBlum ManualsCabinet Hinge Mounting PlatesBlum AVENTOS Mounting Plate with Bracket Set
12345678
5
Subject to technical modifications
without notice. © 2010
7
Adjusting the lift mechanism tension
8
Adjusting the door
Use a screw gun with a #2x2 POZI driver bit to adjust the lift mechanism to the desired
tension. The tension should be the same on both lift mechanisms.
9
Attach covers
Use a POZI screwdriver to adjust cam adjustments for each of the three-dimensional adjustments.
Snap the symmetrical cover caps on each cover plate. Place the left and right cover plates
over the appropriate lift mechanisms and snap them in place.
± 2 mm± 2 mm± 2 mm