Installation Guide

TANDEM plus BLUMOTION
Subject to technical modifications without notice. © 2015 Blum Inc.
Dimensions in millimeters (inch equivalents as noted)
1
569H/569. installation instructions
Side-to-side adjustment Rear side-to-side adjustment
1
Rotate side-to-side adjustment left or
right equally on both locking devices. Drawer
front moves in the same direction as rotation.
2
After front side-to-side adjustment is
made with the locking devices, rotate the
rear side-to-side adjustment left or right
to re-align the back of the drawer box with
the front. Drawer back moves in the same
direction as rotation.
Maximum 1.5 (1/16") to left or right in both front and rear (tool-free)
NOTE: Side-to-side adjustment not available on T51.x8xx locking devices
Height adjustment Tilt adjustment
1
Press up on adjustment tab
2
Push towards back of drawer
Maximum 3 (1/8") rise of drawer front (tool-free)
Rotate the tilt adjustment lever on the rear of
each runner to lift the back of the drawer and
tilt the top of the drawer front forward
Maximum 5 (3/16") rise of drawer back (tool-free)
NOTE: Height and tilt adjustments available with all combinations of locking devices and runners
Depth adjustment on runner
TANDEM 569 runners feature elongated
holes that allow ±4.5 (3/16") depth adjustment
Depth adjustable locking device
Locking device
with side-to-side,
height and
depth adjustment
Turning the adjustment screw allows
for up to a
+
2.5 (3/32") out adjustment
NOTE: For T51.1901.PS setback in inset
applications, see page 5
R
L
R
L
Drawer
front
L
R
L R
T51.1901.PS
0
0
1
2
Heavy duty full extension concealed runners
Basic components Locking devices Runners
sic
components