Subject to technical modifications without notice.
Dimensions in millimeters (inch equivalents as noted) © 2013 Blum, Inc.
4
Runner mounting specifications
Side view
NOTE: Orange dots indicate screw locations required to meet specified load capacities
Cabinet and drawer specifications
Side view
Panel application
TANDEM plus
BLUMOTION
cabinet
depth
minimum inside
cabinet depth
drawer
length
maximum
drawer
thickness
runner
length
563H5330B
610 (24") 557 (21-15/16") 533 (21")
16 (5/8")
548 (21-9/16")
563.5330B
610 (24") 557 (21-15/16") 533 (21") 548 (21-9/16")
563H4570B
533 (21") 480 (18-29/32") 457 (18") 471 (18-17/32")
563.4570B
533 (21") 480 (18-29/32") 457 (18") 471 (18-17/32")
563H3810B
457 (18") 404 (15-29/32") 381 (15") 395 (15-9/16")
563H3050B
381 (15") 328 (12-29/32") 305 (12") 319 (12-9/16")
563H2290B10
305 (12") 266 (10-15/32") 229 (9") 259 (10-3/16")
610 (24")
cabinet
533 (21")
cabinet
457 (18")
cabinet
381 (15")
cabinet
480 (18-29/32") minimum
mounting position 37 (1-15/32")
cabinet face
setback 3 (1/8")
557 (21-15/16") minimum
18 (23/32") typical
224 (8-13/16")256 (10-3/32")
224 (8-13/16")192 (7-9/16")
404 (15-29/32") minimum
328 (12-29/32") minimum
128 (5-1/32")192 (7-9/16")
128 (5-1/32")96 (3-25/32")
563H3050B
563H4570B
563H3810B
563H5330B
533 (21") drawer
(12")
cabinet
563H2290B10
266 (10-15/32") minimum
305
detail of front holes
7 (9/32")
32 (1-1/4")
9 (11/32") typical
37 (1-15/32")
25 (31/32")
34 (1-11/32")
610 (24")
cabinet
557 (21-15/16") minimum
224 (8-13/16")
563.5330B
533 (21")
cabinet
480 (18-29/32") minimum
224 (8-13/16")
563.4570B
533 (21") drawer
457 (18") drawer
457 (18") drawer
381 (15") drawer
305 (12") drawer
229 (9") drawer
96 (3-25/32") 96 (3-25/32")
T51.1901R
Locking device with side adjustment (right)
T51.1901L
Locking device with side adjustment (left)
T51.1801R
Locking device (right)
T51.1801L
Locking device (left)
606N or 606P
#6 Wood screw
(for mounting runner to cabinet side, rear brackets and locking devices)
662.1150.HG
#6 System screw
(for mounting runner to cabinet side)
inside cabinet depth
bottom clearance 14 (9/16")
minimum top
clearance 6 (1/4")
setback 3 (1/8")
drawer gap 1.5 (1/16")
mounting position 37 (1-15/32")
drawer thickness
maximum drawer height =
opening minus
20 (25/32")
25 (31/32")
37 (1-15/32")
cabinet depth
runner length
drawer length
bottom recess 13 (1/2")
cabinet face