User Manual

3
2
5
6
7
3
2
5
6
7
3
2
5
6
7
ECODRILL and Torx bits (included)

1 
10mm
1mm
 
Ø8
45
9.5
Ø35
B
Door
C
7
Subject to technical modications without notice. © 007
Assembly aids
All dimensions in millimeters (inch equivalents as shown).
1 2 3 4
Templates and accessories
ECODRILL and accessories
- Simple device for boring Blum hinge pattern
- Driven by electric/cordless drill (1v or better)
- Each drill bit is driven separately and retracts automatically
- Variable boring distance from mm to 8mm
- Clamps to various door thicknesses up to 40mm (1-9/16")
- Includes drill bits (pre-installed) and two Torx driver bits
Set boring distance cams by rotating to
the desired position
Using the ECODRILL
Tool Set
 wrenches
 Torx driver bits
 Torx chucks
Replacement drill bits
Ø
mm drill bit
Ø8mm drill bit
1




Blum boring pattern
Align ECODRILL body
with hinge center line
marked on the door
Secure ECODRILL to
the door by rotating the
clamp arms
With the Torx bit, bore the three
holes separately
ECODRILL
M31.1000
Replacement Ø35mm bit
M31.ZB35.02
Replacement Ø8mm bit
M31.ZB08.02
Tool set
MZW.1300
Part No.
www.cabinetparts.com
Cabinetparts.com