Specification Sheet

Product details
© Julius Blum GmbH / Legal terms and conditions: The information provided is not binding and Julius Blum GmbH assumes no legal
responsibility for it. Julius Blum GmbH makes no warranty for inaccurate or erroneous data.
1 / 2
6/21/2021 9:10 PM
MINIPRESS P - Boring and insertion machine, vertical, 1x220 V / 60Hz, Market-specific USA
Part number M53.1053*US
Item number 09171559
Color / finish Orange
Packaging quantity 1
Weight per100Pcs in kg 5,414.79
EAN code 9002617790870
UPC code 
Technical attributes
Attribute Value
type of machine MINIPRESS P
type of device table device
additions Market-specific USA
control and drive electro-pneumatic
boring and processing direction vertical
processing possibility boring and component insertion
boring head assembly screw assembly
type of connection 1-phase
nominal voltage 1x220
operating power/frequency 1 x 220V, 60Hz
nominal current 6.5
motor performance 1,1
frequency 60Hz
model 05
length of base ruler 600 mm
dimension breakdown Calibration from zero position: 11 13/16 inch left, 11 13/16 inch right
dimension breakdown Calibration from zero position: 300 mm left, 300 mm right
connection pressure 5 bar to 7 bar
air consumption / cycle 1.5 liters per cycle
type of wood removal wood blow-off and wood exhaust
maximum wood thickness 45mm (boring only)
X-coordinate (parallel ruler) 300mm to left(MINUS),0mm(CENTER POINT),300mm to right(PLUS)
Y-coordinate (right angle against ruler) Vertical, from 0 to 70mm backwards
Z-coordinate (height) 45 mm downwards (MINUS)
processing of front fixings
processing of hinges
processing of mounting plates
processing of connector
boring for System boring
assembly device accessories M53.0720 hold down clamp R+L, assembled
assembly device accessories MZA.5300 work table, enclosed
assembly device accessories MZE.2110 Digital counter set, assembled