User Guide

Subject to technical modifications without notice.
Dimensions in millimeters (inch equivalents as noted) © 2013 Blum, Inc.
6
Attachment specifications
INST-TDM569H-569. 07.13
Millimeter to inch conversion chart
1 1.5 2 3 4 5 5.5 6 7 8 9 9.5 10 11 12 13 13.5 14 15 16 17 17.5 18 19 20 20.5 21 22 23 24 24.5 25.4
1
/
32
1
/
16
3
/
32
1
/
8
5
/
32
3
/
16
7
/
32
1
/
4
9
/
32
5
/
16
11
/
32
3
/
8
13
/
32
7
/
16
15
/
32
1
/
2
17
/
32
9
/
16
19
/
32
5
/
8
21
/
32
11
/
16
23
/
32
3
/
4
25
/
32
13
/
16
27
/
32
7
/
8
29
/
32
15
/
16
31
/
32
1
Depth adjustment specifications
Side view
Mount each runner using at least two of the elongated holes.
Install the drawer to check the position of the drawer front.
Remove the drawer, loosen screws and make adjustments if
necessary, ±4.5 (3/16"). Tighten the screws, verify the drawer
front position and finish mounting the runners using the screw
locations indicated by the orange dots.
TANDEM plus
BLUMOTION
AB
569.7620B
244.5 (9-5/8") 372.5 (14-21/32")
569.6860B
244.5 (9-5/8") 372.5 (14-21/32")
569.6100B
244.5 (9-5/8") 372.5 (14-21/32")
569H5330B
244.5 (9-5/8") 500.5 (19-23/32")
569H4570B
244.5 (9-5/8") 436.5 (17-3/16")
A
B
20.5 (13/16")
setback