Product Literature

Specifications
Pre-bore holes for use with
METABOX C15. Ø5 x 10
(3/16" x 3/8") holes for
13 (1/2") material
Bore Ø10 x 12 (Ø3/8" x 1/2") hole for front fixing brackets with dowels
(Determine locations from specifications below, or see page 42 for pre-determined overlays)
Installation specifications
Rear bracket for frame cabinet applications
page 35
For gallery rail specifications
page 16
For interior drawer specifications
page 20
Dimensions in millimeters (inch equivalents as noted) © 2021 Blum, Inc.
11
TANDEM plus BLUMOTION
METABOX
87
3234.5
9
20.5
V
inside opening width minus
31 (1-1/4")
drawer profile length minus 2 (1/16")
32
Ø5 x 12
9
32
37
inside opening width minus
31 (1-1/4")
9
32
20.5
height
bottom
location
side
location
32
Material
thickness
Back height
13 (1/2") 74 (2-15/16")
16 (5/8") 71 (2-13/16")
19 (3/4") 68 (2-11/16")
Nominal length Bottom length
550 (21-5/8") 548 (21-9/16")
500 (19-11/16") 498 (19-5/8")
450 (17-11/16") 448 (17-5/8")
400 (15-3/4") 398 (15-11/16")
350 (13-3/4") 348 (13-11/16")
270 (10-5/8") 268 (10-9/16")
Front
Back
Bottom
V = variable bottom thickness minimum
Back
Cabinet
8.5
13.5 min.
86 min.
110 min.
OL
X
OL
5 min.
X
8.5
8.5
inside opening
24 min.
OL = overlay
X = OL + 8.5
Y = OL + 13.5
64
Y
Ø10 x 12
C15 series
prong
Front
Pre-bore Ø5 x12
holes if using
system screws
320M Drawer Series