Product Literature
POSI-STOP assembly
Add-on device to keep drawer front from
contacting the cabinet face.
▬ Available in thicknesses of 1.5 (1/16") or
3 (1/8")
▬ Synthetic, natural finish
▬ Non-handed
▬ Use two per drawer
▬ Snap in place and secure with wood screw
Part no.
1.5 (1/16") gap
298.3210.01
3 (1/8") gap
298.3230.01
Installation screws
606N or 606P
Drawer front support brackets
Standard drawers Interior pull-out trays Add-on brackets for wide drawers to keep the
front tight to the drawer bottom.
▬ Stainless steel
▬ Attach with 612TH screws
#6 x 1/2" trusshead
Part no.
For standard drawers
ZSB.0090.01
For interior roll-out trays
ZSB.0045.01
Installation screw
612TH
Cabinet profile spacers
With split dowel
Without split dowel
To space runners away from the cabinet side
to clear door protrusion for interior roll-out
trays.
▬ Two thicknesses available that can be
stacked up to 24 (15/16")
▬ Synthetic, cream color
■ 8 (5/16") with Ø5 (3/16") x 11
dowel for linebore mounting Part no.
320M0188
■
4 (5/32") stackable
320M0048
Installation screw
606N or 606P
© 2021 Blum, Inc. Subject to technical modifications without notice.
34
METABOX
Will not work with
rear mount sockets
(Part no. 602320).
1.5 or 3 gap
14 min.
Drawer front
Drawer
bottom
Use #6 FH
screw that
penetrates
cabinet side at
least 13
NOTE: Use spacers on front, middle
and rear of each cabinet profile for
adequate support
Drawer front
Drawer
bottom
4
8
1
2
1
2
NOTE:
Has elongated holes
Accessories