Product Literature

Specifications
Pre-bore holes for use with
METABOX C15. Ø5 x 10
(3/16" x 3/8") holes for
13 (1/2") material
inside opening width minus 31 (1-1/4")
dr
awer profile length minus
2 (1/16")
32
Ø5 x 12
9
32
37
inside opening width minus 31 (1-1/4")
9
20.5
height
bottom
location
side
location
Bore Ø10 x 12 (Ø3/8" x 1/2") hole for front fixing brackets with dowels
(Determine locations from specifications below, or see page 42 for pre-determined overlays)
Drawer bottom
thickness
Back height
13 (1/2") 42 (1-5/8")
16 (5/8") 39 (1-9/16")
19 (3/4") 36 (1-7/16")
Nominal length Bottom length
550 (21-5/8") 548 (21-9/16")
500 (19-11/16") 498 (19-5/8")
450 (17-11/16") 448 (17-5/8")
400 (15-3/4") 398 (15-11/16")
350 (13-3/4") 348 (13-11/16")
270 (10-5/8") 268 (10-9/16")
Front
Back
Installation specifications
Rear bracket for frame cabinet applications
page 35
For gallery rail specifications
page 16
For interior drawer specifications
page 19
Front
Bottom
55
34.5
V
9
20.5
V = variable bottom thickness minimum
13 (1/2") material
Back
Cabinet
8.5
13.5
min.
54 min.
78 min.
OL
X
OL
5 min.
X
8.5
8.5
inside opening
24 min.
OL = overlay
X = OL + 8.5
Y = OL + 13.5
32
Y
Ø10 x 12
C15 series
prong
Pre-bore Ø5 x12
holes if using
system screws
Dimensions in millimeters (inch equivalents as noted) © 2021 Blum, Inc.
9
TANDEM plus BLUMOTION
METABOX
320N Drawer Series