ORGA-LINE for TANDEM drawers Drawer dividing system for cutlery and utensils
Table of contents Julius Blum, Inc. is a leading manufacturer of functional hardware for the cabinet and furniture industry specializing in concealed hinges and drawer runner systems. Virtually all of the hardware needed to assemble and make casegoods functional are available within the wide range of lifetime guaranteed Blum products. Blum’s manufacturing and distribution complex in Stanley, North Carolina supplies the North American markets through a network of more than 150 dependable distributors.
ORGA-LINE for TANDEM drawers Tool-free installation Triple tray 10-3/8" 3-7/16" ORGA-LINE divider sets for TANDEM drawers are easily installed without tools. The spring-loaded components fit into the drawers snugly and the connector pieces are assembled with dovetail slots. Double tray 6-15/16" Tray sizes ORGA-LINE kits have trays in three lengths. Most cutlery kits come with five triple length trays. Other kits may have double or single length trays included.
ORGA-LINE for TANDEM drawers Insert kits for 21" drawer lengths Typical for kitchen cabinets Cutlery kits Adjustable section 4-1/4" ZHI.533BI1A 11-3/16" ZHI.533BI3A 15" 15-3/4" to 16-1/2" ZHI.533KI4A 18-3/4" to 19-1/2" ZHI.533TI4A Utensil kits ZHI.533TI5A Length range for all kits 19-1/4" to 20" ZHI.533FI1A 11-9/16" Spring-loaded compensation tray ZHI.533FI3A 21 " 4-1/4" Inside drawer length must be within this range for the springloaded side rails to fit.
ORGA-LINE for TANDEM drawers Insert kits for 18" drawer lengths Typical for vanity cabinets Utensil kits Length range for all kits 16-1/4" to 17" 4-1/4" 11-9/16" Single tray ZHI.457FI3A Spring-loaded side rail 18 " ZHI.457FI1A Inside drawer length must be within this range for the springloaded side rails to fit. Combination kit Triple tray Double tray Adjustable divider 11-7/8" Example of drawer with ZHI.457G13A kit installed ZHI.
ORGA-LINE for TANDEM drawers Applications for 12" wide cabinets 21" Based on cabinets with 1-1/2" frames and 5/8" thick drawer sides 7-3/8" 3-1/8" 12" ZHI.533BI1A Applications for 15" wide cabinets 3-1/8" Cutlery Utensils ZHI.533FI1A ZHI.457FI1A 21" Drawer 21" Drawer 18" Drawer 21" Based on cabinets with 1-1/2" frames and 5/8" thick drawer sides 10-3/8" 15" 6-1/8" ZHI.533BI1A Applications for 18" wide cabinets 6-1/8" Cutlery Utensils ZHI.533FI1A ZHI.
ORGA-LINE for TANDEM drawers Applications for 21" wide cabinets Based on cabinets with 1-1/2" frames and 5/8" thick drawer sides 21" Adjustable section fills drawer width 16-3/8" 21" Cutlery ZHI.533TI4A 5-3/16" ZHI.533BI3A 4-3/4" ZHI.533FI3A ZHI.457FI3A 8" Cutlery ZHI.533FI1A 21" Drawer 4-1/2" Utensils ZHI.533MI3A ZHI.457GI3A 21" Drawer 18" Drawer Subject to technical modifications without notice. © 2002 21" Drawer 7 Combination + ZHI.
ORGA-LINE for TANDEM drawers Applications for 24" wide cabinets Based on cabinets with 1-1/2" frames and 5/8" thick drawer sides 21" Adjustable section fills drawer width 19-3/8" 24" Cutlery ZHI.533TI5A 4-3/8" 3-15/16" Cutlery ZHI.533KI4A ZHI.533FI1A ZHI.457FI1A ZHI.533BI1A 21" Drawer 3-9/16" ZHI.533FI3A ZHI.457FI3A Cutlery + 3-1/4" Utensils + + 21" Drawer ZHI.533FI1A ZHI.457FI1A 21" Drawer 18" Drawer 8 ZHI.533BI3A 21" Drawer Combination + + ZHI.533MI3A ZHI.
ORGA-LINE for TANDEM drawers Applications for wider cabinets Based on cabinets with 1-1/2" frames and 5/8" thick drawer sides 27" cabinet 7-3/16" 7" 22-3/8" 22-3/8" ZHI.533FI1A + ZHI.533BI3A ZHI.533FI1A ZHI.457FI1A 21" Drawer + + ZHI.533FI3A ZHI.457FI3A 21" Drawer 18" Drawer 30" cabinet 2-5/16" 1-15/16" 25-3/8" ZHI.533MI3A + 25-3/8" ZHI.533BI3A ZHI.533FI3A ZHI.457FI3A 21" Drawer + + ZHI.533MI3A ZHI.
ORGA-LINE Plate Holder A new idea for organizing the kitchen The ORGA-LINE Plate Holder makes organizing stacks of plates quick and easy. The Plate Holder easily adjusts to fit most common dinner plates and bowls. The idea behind the ORGA-LINE Plate Holder is to make storing and accessing plates simple by placing them in a drawer instead of an overhead cabinet. Special rubber feet ensure that no matter where you put the Plate Holder it will stay in place.
ORGA-LINE for TANDEMBOX drawers The ORGA-LINE system of cutlery dividers is also available for Blum’s TANDEMBOX drawer system. A separate program of cutlery kits is designed to fit into these stainless steel drawers and offers all of the same advantages. Whether or not you have traditional wood or high-end contemporary cabinets, Blum has the hardware system to organize your drawers.
M TANDEMBOX M back height - cutlery application Product Description Basic component - ORGA-LINE flexible dividing system - High quality stainless steel utensil dividers combined with wear resistant nylon parts in dust gray (R737) - Removable, dishwasher safe cutlery trays - For runner lengths of 500 (20") and 550 (22") page 18 M height drawer Cutlery organizer kits Part No. ZSI.500BI1 ZSI.550BI1 Runner length 500 (20") 550 (22") Part No. ZSI.500BI3A ZSI.550BI3A 42 126 Part No. ZSI.500KI4A ZSI.
M TANDEMBOX M back height - utensil application Product Description Basic component - ORGA-LINE flexible dividing system - High quality stainless steel utensil dividers combined with wear resistant nylon parts in dust gray (R737) - Removable, dishwasher safe cutlery trays - For runner lengths of 500 (20") and 550 (22") page 18 M height drawer Utensil organizer kits Runner length 500 (20") 550 (22") Part No. ZSI.500FI3 ZSI.550FI3 Runner length 500 (20") 550 (22") Part No. ZSI.500MI3 ZSI.
M TANDEMBOX M back height - odds & ends application Product Description Basic component - ORGA-LINE flexible dividing system - High quality stainless steel utensil dividers combined with wear resistant nylon parts in dust gray (R737) - Removable, dishwasher safe cutlery trays - For runner lengths of 500 (20") and 550 (22") page 18 M height drawer Odds & ends organizer kits Runner length 500 (20") 550 (22") Part No. ZSI.500FI3 ZSI.550FI3 Part No. ZSI.500MI3 ZSI.
M ORGA-LINE combinations for wide drawers Wide drawer applications 36" / 39" / 42" wide cabinets Runner length 500 (20") 550 (22") 36" / 39" / 42" wide cabinets ZSI.500FI3 + ZSI.550FI3 + Runner length 500 (20") 550 (22") ZSI.500MI3 ZSI.550MI3 ZSI.500KI4A + ZSI.550KI4A + ZSI.500MI3 ZSI.550MI3 Calculation of remaining space 64 Example: Inside cabinet width is 572 (22-1/2") Cutlery kit installed is ZSI.
TANDEMBOX B back height - food / pots / plates application Product Description Basic component - Application for food, pots, pans, plastic containers and plates - For TANDEMBOX B back height drawer configuration - ORGA-LINE flexible dividing system [A] page 24 B height drawer Organization parts [B] Cross gallery rod [F] Gallery rod spring connector [C] Cross gallery connector Dust gray (R737) ZRU.00E0.01 ZRU.00Z0.
B Food storage [A] [B] x 4 [C] x 4 [D] x 2 Pots / pans and plastic container storage [B] x 2 [A] [C] x 2 Plate storage [A] [G] x 2 Food storage with BOXSIDE [A] [E] x 2 Note: 559 heavy duty cabinet profiles are recommended if drawer weight including contents exceeds 75 lb. Subject to technical modifications without notice.
TANDEMBOX D back height - food / pots / plates application Product Description Basic component - Application for food, bottles, pots, pans, plastic containers and plates - For TANDEMBOX D back height drawer configuration - ORGA-LINE flexible dividing system [A] page 28 D height drawer Organization parts [C] Spring connector [B] Cross divider W = inside cabinet width minus 320 (12-1/2") for Food/bottle drawer W = inside cabinet width minus 91 (3-1/2") for other drawers Gray (R906) or Nickel (Ni) Z40H
D Food storage [A] [E] x 1 [F] x 1 Pots / pans and plastic container storage [A] [E] x 1 [B] x 1 [C] x 2 Plate storage [A] [E] x 1 [G] x 2 Food and bottle storage [A] [E] x 1 [H] x 1 Note: 559 heavy duty cabinet profiles are recommended if drawer weight including contents exceeds 75 lb. Subject to technical modifications without notice.
TANDEMBOX D back height - food / pots / plates application Product Description Basic component - Application for food, bottles, pots, pans, plastic containers and plates - For TANDEMBOX D back height drawer configuration - ORGA-LINE flexible dividing system [A] page 32 D height drawer Organization parts [B] Cross gallery rod [F] Gallery rod spring connector [C] Cross gallery connector Dust gray (R737) ZRU.00E0.01 ZRU.00Z0.
D Food storage [A] [B] x 4 [C] x 4 [D] x 2 Pots / pans and plastic container storage [A] [B] x 2 [C] x 2 Plate storage [A] [G] x 2 Food storage with BOXSIDE [E] x 2 [A] * * Second set of galleries not required Note: 559 heavy duty cabinet profiles are recommended if drawer weight including contents exceeds 75 lb. Subject to technical modifications without notice.
M TANDEMBOX SPACE CORNER - utensil application Product Description Basic component - ORGA-LINE flexible dividing system - High quality stainless steel utensil dividers combined with wear resistant nylon parts in dust gray (R737) - For TANDEMBOX M back height drawers 3 page 36 M height drawer Utensil organizer kits ZSI.500FI3 474 474 ZSI.
D TANDEMBOX SPACE CORNER - pots/plasticware app.
ORGA-LINE cutlery tray assembly ORGA-LINE utensil tray assembly ORGA-LINE - cross divider insertion � � � � � � ORGA-LINE - food / bottle storage assembly 3 2 1 ORGA-LINE plate holder 1 2 2 1 Subject to technical modifications without notice.
Information is also available on these other Blum products: • Angled hinge program • CLIP top hinge program • COMPACT concealed hinges for frame cabinets • Concealed hinges: INSERTA, CLIP and MODUL • Machines and assembly aids • MAXUS institutional hinges • METABOX drawer system • POCKET DOOR hardware • STANDARD drawer runners • SOLO concealed runners • TANDEM concealed runners Julius Blum, Inc. 7733 Old Plank Rd. Stanley, NC 28164 toll free 800-438-6788 local 704-827-1345 fax 704-827-0799 internet www.
