User manual

- 10 -

Pairing the Headset with a Compatible Device

1. Turning on your phone and the headset.

2. Activate the Bluetooth function on the phone. (See the user guide of your phone

for instructions).

3. Press and hold the Multifunktion key for 2 sec. until the blue and red indicator

lights ﬂ ashes in turn. When you release the key, the headset is ready to be paired.

Note: If the headset paired already, you should cut the current connection, then it

can pair again.

4. Set the phone to search for Bluetooth devices. (See the user guide of your

phone for instructions).

5. Select the headset BT-ET07 from the phone list of found devices.

6. Enter the pass key 0000 to pair and connect the headset to your phone. For

some phones you may need to make the connection separately after pairing

(See the user guide of your phone for details). You only need to pair the

headset with your phone for one time. When the headset is connected to the

phone and ready for use, the headset beeps, and the blue indicator light ﬂ ashes

every 10 seconds(some ﬂ ash every 5 seconds). The headset model appears in

the phone menu where you can view the current paired Bluetooth devices.

Note: If the headset can not connect any compliant mobiles or other devices suc-

cessfully within 20 minutes after it turns on, the headset will turn off automatically.