User manual

- 4 -
- 5 -
2� Getting started
Forthe1sttimeyouusetheBlumaxBluetoothGPS-4012Receiver,pleasecharge
batteryuntilitisfull(theLEDblinks).Takethepowercableandconnectittothe
powerjack(miniUSBtype).Thiswill begintochargethebattery.TheLEDthat
representsthebatteryistheright-mostbatteryicon(showninbelow).
Step 1 Charging Your Battery
Pleasefollowtheprocedurestepbystep.
•IftheLEDisred,thatmeansbatterypoweriscriticallylow.Chargeimmediately.
•IftheLEDisgreen,thatmeansbatteryischargingnow.
•IftheLEDisblinking,thatmeansbatteryisfullycharged.
•WhenyouplugintotheminiUSBcabletochargeyourunit,itwilltake
5~10 seconds then you can see the green LED turning on.
LED,
represents
thebattery
status