User manual

- 17 -
Blumax GPS Tracker V1.0
En
Movement/Geofence12.
Movement Alarm12.1
SMS-Command: W******,006,XX
Description: When the tracker moves out of a preset square scope, it
will send an SMS alarm to the authorized phone number for SOS.
Notes: XX is the preset distance to the tracker’s original place
=00, to turn off this function
=01, 30 m =02, 50 m =03, 100 m =04, 200 m
=05, 300 m =06, 500 m =07, 1000 m =08, 2000 m
Example: W000000,006,06
When tracker moves out of
this square scope, it will send
out an SMS alarm.
12.2 Geo-fence Alarm
SMS-Command: W******,017,X or W******,117,X
Description: Turns on Geo-fencing alarm. When the tracker moves
in/out the preset scope, it will send an SMS alarm to the authorized
phone number for SOS.
Notes:
017 is for alarm when tracker moves out the preset scope; 1.
117 is for alarm when tracker moves in.2.
X is the coordinates which include: Lower-left X,Lower-left Y,Upper- 3.
right X,Upper-right Y
Lower-left X should be less than Upper-right X;4.
All longitudes and latitudes should be in ASCII format as follows:-5.
Longitude: DDDFF.FFFF,E/W. 4 places of decimal. ‘0’ is needed
to be stuffed if no value available.
Latitude: DDFF.FFFF,N/S. 4 places of decimal. ‘0’ is needed to
be stuffed if no value available;
Send W******,006,00 to turn off Geo-fence function.6.