User manual

- 29 -
Blumax GPS Tracker V1.0
En
Remarks: If no APN username and password are required, just input
APN only;
APN defaulted as ‘CMNET’;
APN + username + password should not over 39 characters.
Set IP and port W******,012,IP,Port
W000000,012,
220.121.7.89,8500
W000000,012,
www.blu-max.eu,8500
Remarks: IP is your server’s IP or the domain name. Port: [1,65534]
Set DNS server IP
W******,009,DNS
Server IP
W000000,009,220.23.4.90
Remarks: In case the domain name you set by the last SMS-Command
(W******,012,IP, Port) doesn’t work, which means your server IP is not
properly set. You can fi rst use this command to set DNS Server IP (please
check with your DNS server provider for the DNS Server IP) and then redo
the SMS-Command W******,012,IP, Port.
Enable GPRS
tracking
W******,013,X W000000,013,1
Remarks:
X=0, to turn off GPRS tracking (default);
X=1, to enable GPRS tracking via TCP
X=2, to enable GPRS tracking via UDP
Set GPRS interval W******,014,XXXXX W000000,014,00060
Remarks: to set time interval for sending GPRS packets.
XXXXX should be in fi ve digits and in unit of 10 seconds.
XXXXX=00000, to turn off this function;
XXXXX=00001~65535, time interval for sending GPRS packet and in unit
of 10 seconds.
In this example, the tracker will send every 600 seconds (10 minutes).
For more information regarding GPRS tracking please refer to <GPRS
Communication Protocol>
Sleep mode W******,021,XX### W000000,021,02###