Manual

DA44AU USER MANUAL
06
www.blustream.com.au | www.blustream.co.uk
Advanced Dante® Settings
It is also possible to change various Dante® related settings of the DA44AU under the “Device Info” screen in the
Dante® Controller soware. To do so, select the “Device Config” menu.
Here we can adjust the sample rate of the DA44AU. Please Note: That Dante® products can only transmit or receive
audio from other Dante® products that are set up with the same sample rate. A mismatch in sample rate may stop
audio from transmitting.
Under the “Device Config” screen we can also adjust the latency of the DA44AU from 1, 2 or 5 milliseconds.
By default the DA44AU is shipped with its network settings set to obtain an IP Address automatically. This means
that if a DHCP server is present on your network, it will provide the DA44AU with an IP Address. If no DHCP server
is present then the DA44AU will receive a default IP Address in the 169.254.xxx.xxx range. To change the IP Address
of the DA44AU, you must enter the “Network Config” menu in the “Device Info” screen of the Dante® Controller
soware.
Dante® Controller