Quick Reference Guide
HEX150CS-KIT QUICK REFERENCE GUIDE
contact support@blustream.co.uk / support@blustream.com.au
OPT IN HDMI OUT L / R OUT COAX OUT ETHERNET
(ARC)
LINK
OPTON
MODE
1
1
0
0
LRM
ARC
IR OUT IR IN RS-232 HDBT IN OFF24V 1A HDMI
02
Panel Description HEX150CS-RX
Panel Description HEX150CS-TX
1 DC 24V 1A 4-pin mini DIN connector
2 IR OUT (to Blustream 5V 3.5mm IR emitter)
3 IR IN (to Blustream 5V 3.5mm IR receiver)
4 Mode dip-switch - To switch RS-232 serial port
between pass-through and firmware update mode
5 DB9 RS-232 / Serial connector
6 HDBaseT™ input
7 HDBaseT™ Long Range Mode (ON / OFF)
8 Audio return selection switch - Switch between HDMI
ARC and TOSLINK (Optical) when selecting which
audio source to return
e Audio Breakout TX/RX selection switch - Select TX
for local HDMI input audio breakout for Analogue
RCA 2ch output or Optical. Select RX for ARC audio
breakout from RX
r HDMI input - connect to HDMI (ARC) on AVR or source
t HDMI input signal link indicator
y Local HDMI Loop-output
u HDMI output signal link indicator
i ARC CTRL - Select TX to allow ARC audio breakout
without a local source connected to HDMI Input.
Select Source to allow ARC to be returned via the
source connected to the local HDMI Input
o Ethernet port - RJ45. Connect to local network
product to extend 10/100 network to Receiver
9 Optical audio input - TOSLINK audio input. Connects
to the Optical output of the local display device for
Audio Return feature
q HDMI Output - connect to HDMI (ARC) on display
w HDMI signal link indicator
e Analogue 2ch stereo audio output (3.5mm). Note:
Audio input format must be 2ch PCM
r Coaxial Digital audio output (RCA)
t Ethernet port - RJ45. Connect to display to extend
10/100 network from Transmitter.
1 HDBaseT™ Long Range Mode (ON / OFF)
2 EDID DIP switch (UP=0, DOWN=1)
3 IR IN (to Blustream 5V 3.5mm IR receiver)
4 IR OUT (to Blustream 5V 3.5mm IR emitter) RS-232 /
Serial connector
5 HDBaseT™ output
6 DB9 RS-232 / Serial connector
7 USB Upgrade port
8 Power status indicator
9 DC 24V 4-pin mini DIN connector
q Analogue audio 2ch L/R output - Connects to third
party audio amplifier for audio breakout of either
local HDMI or Audio Return Channel from HEX150CS-
RX. Note: Audio input format must be 2ch PCM
w Optical TOSLINK audio output. Connects to local AV
amplifier when using Audio Return Channel (ARC) or
Local/Source HDMI audio breakout
1 2 3 4 5
9 10 11 12 13
6
14
7 8
1 2 3 4 5 6
7 8 9
11 12 13 1410 1715 16 18
OPT IN HDMI OUT L / R OUT COAX OUT ETHERNET
(ARC)
LINK
OPTON
MODE
1
1
0
0
LRM
ARC
IR OUT IR IN RS-232 HDBT IN OFF24V 1A HDMI
L / R
TX
AB
(ARC)
LINK
LINK
OFF
AUDIO OUT OPT OUT RX HDMI IN HDMI OUT ON ETHERNET
HPD
EDID
3 2 1 0
1
0
LRM
ON
IR IN IR OUT HDBT OUT RS-232 UPGRADEOFF 24V 1A
L / R
TX
AB
(ARC)
LINK
LINK
OFF
AUDIO OUT OPT OUT RX HDMI IN HDMI OUT ON ETHERNET
HPD
EDID
3 2 1 0
1
0
LRM
ON
IR IN IR OUT HDBT OUT RS-232 UPGRADEOFF 24V 1A