Manual
HEX31WP-TX USER MANUAL
09contact support@blustream.co.uk | support@blustream.com.au
EDID xx DF zz EDID xx DF zz Set Input xx EDID To Default EDID zz
xx=[00]: All Input Port, [01...03]: Input Port
zz=00: HDMI 1080p@60Hz, Audio 2ch PCM
zz=01: HDMI 1080p@60Hz, Audio 5.1ch PCM/DTS/DOLBY
zz=02: HDMI 1080p@60Hz, Audio 7.1ch PCM/DTS/DOLBY/HD
zz=03: HDMI 1080i@60Hz, Audio 2ch PCM
zz=04: HDMI 1080i@60Hz, Audio 5.1ch PCM/DTS/DOLBY
zz=05: HDMI 1080i@60Hz, Audio 7.1ch PCM/DTS/DOLBY/HD
zz=06: HDMI 1080p@60Hz/3D, Audio 2ch PCM
zz=07: HDMI 1080p@60Hz/3D, Audio 5.1ch PCM/DTS/DOLBY
zz=08: HDMI 1080p@60Hz/3D, Audio 7.1ch PCM/DTS/DOLBY/HD
zz=09: HDMI 4K2K@30Hz, Audio 2ch PCM
zz=10: HDMI 4K2K@30Hz, Audio 5.1ch PCM/DTS/DOLBY
zz=11: HDMI 4K2K@30Hz, Audio 7.1ch PCM/DTS/DOLBY/HD
zz=12: HDMI 4K2K@60Hz 4:2:0 8 bit, Audio 2ch PCM
zz=13: HDMI 4K2K@60Hz 4:2:0 8 bit, Audio 5.1ch PCM/DTS/DOLBY
zz=14: HDMI 4K2K@60Hz 4:2:0 8 bit, Audio 7.1ch PCM/DTS/DOLBY/HD
zz=15: DVI 1280x1024@60Hz, Audio None
zz=16: DVI 1920x1080@60Hz, Audio None
zz=17: DVI 1920x1200@60Hz, Audio None
zz=18: HDMI 1920x1200@60Hz, 2ch/6ch PCM
zz=19: Copy User EDID 1
zz=20: Copy User EDID 2
zz=21: EDID Passthrough
EDID xx CP yy Set Input xx EDID Copy From Output yy
xx = Input on product (00 refers to ALL inputs, 01 = input 1 etc)
yy = Output on product (00 refers to ALL outputs, 01 = output 1 etc)
EDIDSAVE zz Save EDID File From USB Into User Slot zz
zz=19: User EDID 1
zz=20: User EDID 2
CECAUTO ON/OFF Set Auto CEC Commands When Detecting Video Input Signal On Or O
OUT xx CEC INPUT yy Send Output xx CEC Input yy Command
OUT xx CEC VOLUP Send Output xx CEC Vol Up Command
OUT xx CEC VOLDOWN Send Output xx CEC Vol Down Command
OUT xx CEC MUTE Send Output xx CEC Mute Toggle Command
OUT xx CEC PON Send Output xx CEC Power On Command
OUT xx CEC POFF Send Output xx CEC Power O Command
OUT xx CEC yy:yy:yy Send Output xx CEC yy.yy.yy Command
RS232BAUD z Set RS-232 Baud rate To x
z = 1: 2400, 2: 4800, 3: 9600, 4: 19200, 5: 38400, 6: 57600 (default), 7: 115200
RS232ON y:z:a When Detecting A Triggering Signal, Automatically Send y Type Of Command a To The
Third-party Device Whose Baud Rate Is z
RS232OFF y:z:a When Not Detecting A Triggering Signal, Automatically Send y Type Of Command a To
The Third-party Device Whose Baud Rate Is z
RS232ON DISABLE Disable Automatic RS-232 Commands When Detecting Signal
RS232OFF DISABLE Disable Automatic RS-232 Commands When Not Detecting Signal
RS-232 Commands Continued...