Manual

HMXL88ARC USER MANUAL
www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk22
COMMAND ACTION
OUTxx CEC DOWN DOWN On Output xx
OUTxx CEC LEFT LEFT On Output xx
OUTxx CEC RIGHT RIGHT On Output xx
OUTxx CEC RETURN RETURN On Output xx
OUTxx CEC EXIT EXIT On Output xx
OUTxx CEC VOLUP VOLUME UP On Output xx
OUTxx CEC VOLDOWN VOLUME DOWN On Output xx
OUTxx CEC MUTE Toggle Audio MUTE Status On Output xx
OUTxx CEC PLAY PLAY On Output xx
OUTxx CEC STOP STOP On Output xx
OUTxx CEC PAUSE PAUSE On Output xx
OUTxx CEC RECORD RECORD On Output xx
OUTxx CEC INPUTyy
Input Channel yy Selection On Output xx,
The Operation Needs To Wait For TV Communication
To Succeed
xx= 00: All Output Port
xx= [01-08]: Output 1 - 8
yy= [01-04]: TV's HDMI Input 1 - 4
yy= [00]: Current HDMI Input
yy= []:(No Parameter) Will Show Input Select Menu If
TV Support
OUTxx CEC POFF POWER OFF On Output xx
OUTxx CEC PON
POWER ON On Output xx
xx= 00: All Output Port
xx= [01-08]: Output 1 - 8
INxx CEC ENABLE Enable CEC Control On Input xx
INxx CEC DISABLE Disable CEC Control On Input xx
INxx CEC OK Confirm Operation (Enter) On Input xx
INxx CEC UP UP On Input xx
INxx CEC DOWN DOWN On Input xx
INxx CEC LEFT LEFT On Input xx
INxx CEC RIGHT RIGHT On Input xx
INxx CEC RETURN RETURN On Input xx
INxx CEC EXIT EXIT On Input xx
INxx CEC VOLUP VOLUME UP On Input xx
INxx CEC VOLDOWN VOLUME DOWN On Input xx
INxx CEC PLAY PLAY On Input xx
INxx CEC STOP STOP On Input xx
INxx CEC PAUSE PAUSE On Input xx
INxx CEC RECORD RECORD On Input xx
INxx CEC REWIND REWIND On Input xx
INxx CEC FF FAST FORWARD On Input xx
INxx CEC FWD FORWARD On Input xx
INxx CEC BWD BACKWARD On Input xx
INxx CEC POFF POWER OFF On Input xx
INxx CEC PON
POWER ON On Input xx
xx= 00: All Output Port
xx= [01-08]: Output 1 - 8
COMMAND ACTION
CECUSER-
CMD <u8 DevID
u8Addr u8Opcode
pu8Operand[MAX]>
Send Custom CEC Command
u8DevID: 00 Select All CEC Input Port
u8DevID: [01-08] Input 1 - 8
u8DevID: F0 Select All CEC Output Port
u8DevID: [F1-F8] Output 1 - 8
pu8Operand[MAX] : MAX 0 - 14
Eg:CECUSERCMD <F0 40 44 41 > (ALL OUT CEC VOLUP)
Eg:CECUSERCMD <F0 40 44 42 > (ALL OUT CEC VOLDOWN)
RS232BAUD z
Set RS232 Baud Rate To xx
z = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600
(Default), 7 115200
RS232DLYOUTxx:tt
Set Send Output xx Interval Time In tt Seconds
Between RS232 On And User Commands
xx= 00: All Output Port
xx= [01-08]: Output 1 - 8
tt= [0-180]: Delay tt Seconds
RS232OUTxx ON
Enable RS232 Remote-control Mode On HDBT
Output xx
RS232OUTxx OFF
Disable RS232 Remote-control Mode On HDBT
Output xx
RS232ONOUTxx
y:z:a:b
Save y Type Of Command a Stored In Slot x Whose
Baud Rate Is z On Output xx
xx= 00: All Output Port
xx= [01-08]: Output 1 - 8
y = 1 RS232 Display On
y = 2 RS232 Display Input Select
y = 3 RS232 User Command 1
y = 4 RS232 User Command 2
y = 5 RS232 User Command 3
z = a ASCII, h HEX
a = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600
(Default), 7 115200
b = RS232 Command
RS232OFFOUTxx z:a:b
Save RS232 O Command a Of y Type Whose Baud
Rate Is z On Output xx
z = a ASCII, h HEX
a = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600
(Default), 7 115200
b = RS232 Command
RS232ONOUTxx DIS-
ABLE
Disable Auto RS232 Commands When Detecting A
Signal On Output xx
RS232OFFOUTxx
DISABLE
Disable Auto RS232 Commands When Not Detecting
A Signal On Output xx
xx= 00: All Output Port
xx= [01-08]: Output 1 - 8
NET DHCP ON/OFF Set Auto IP(DHCP) On Or O
NET TN ON/OFF Set Telnet Port On Or O
NET TN8000 ON/OFF Set Telnet Port 8000 On Or O
NET IP xxx.xxx.xxx.xxx Set IP Address
NET GW xxx.xxx.xxx.xxx Set Gateway Address
NET SM xxx.xxx.xxx.xxx Set Subnet Mask Address
NET RB Set Network Reboot And Apply New Config!!!
NET TN xxxx Set Telnet Port
RS-232 Configuration and Telnet Commands