Manual

HMXL88ARC USER MANUAL
www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk06
The front panel of the Matrix features a menu system to provide quick configuration of key features of the matrix.
Press the menu button ( ) to bring up the menu system of the matrix on the front panel display. While the menu
system is active, the arrow keys (<, >, ^, v) to navigate through, and use select (√) or cancel (x) buttons to change
settings.
The menu system allows configuration of the following items:
1. EDID Settings
2. POC Settings
3. Network Config
4. F/W Version
Front Panel Menu System
This matrix is compatible with all Blusream HDBaseT™ receivers however support of specific features will vary.
It is recommended to utilize Blustream RX70CS HDBaseT™ receivers with this Matrix as this fully supports the following
key features:
• CSC - Colour Space Conversion, the method utilized to support 18Gbps signals being transmitted over HDBaseT
• ARC - Audio Return Channel, to output the displays Audio Return Channel from the optical outputs of the Matrix
• PoC - Power Over Cable, to power the HDBaseT™ receiver from the Matrix over CAT cable without any additional
power supplies required
HDBaseT™ Receiver Compatibility
Please note PoC (Power over Cable) has been disabled on this product by default to reduce the risk of damaging
incompatible HDBaseT™ receiver products. Please check your HDBaseT™ receiver supports 24V PoC before enabling
PoC on this Matrix. The Blustream RX70CS HDBaseT™ receiver is recommended for use with this Matrix as it supports
all features of this Matrix.
There are 3 ways to enable/disable PoC on this matrix:
1 Using Matrix web browser interface (see section on Web GUI operation)
2 Using Matrix Front Panel Meny System (see secion above)
3 Using API commands via Telnet / RS-232 (see Telnet API section at the end of this manual)
Power Over Cable