User's Manual

06 07

6 Charging

7 Learning to Ride

Wear an approved helmet and other protective

gear to minimize any possible injury.

1. Power on the Scooter and check the

power level indicator. Charge the

Scooter if the battery level is low.

There are safety risks when learning to ride the scooter. You must read the

Riding Safety before your first ride.

Close the charge

port cover when

finished.

Insert the

charge plug.

Charging step tips

Open the charge

port cover.

WARNING

Do not charge if the charge port or power cord is wet.

Do not charge or use your battery if it is damaged or see trace of water.

Close the charge port cover when not charging.

Charge port

5 Assembling Your Scooter

3. Install six screws (two on each side)

with the included hex wrench.

4. Long press the power bottom to verify

that your scooter can be powered on

2. Firmly connect the wires inside the

handle and the stem. Slide the handle

onto the stem. Be aware of the correct

orientation.

Headlight

toward front

1. Unfold the handlebar stem and fasten

it. Then unfold the kickstand to

support the scooter.

6(7