Instructions / Assembly

Water Feature Light (A) Light Transformer (B) Plants (C)
Pump (D) Photo may vary 3 Wall Anchors (E) Splash Guard (F)
Wall Bracket (G)
Bellezza Assembly:
Tools Required:
Level
Pencil
Phillips Screwdriver
Measuring Tape
Decide where you would like to install your Water Feature.
** It is critical that your waterfall is level as this will ensure even water flow. **
a. Due to the relatively light weight nature of your new Water Feature, it is not
necessary to mount it directly into wall studs.
b. We recommend you install your waterfall above an electrical outlet. A Ground Fault
Circuit Interrupter (GFCI) outlet with an internal circuit breaker is preferred.