Instructions / Assembly

3. Installing and Operating your Water Feature
a. Unwind the Pump and Valve (F) (Now to be referred
to as “pump”) and Water Feature Light and
Transformer (A&B) power cords and run them behind
the half circular cut behind the reservoir as shown in
Fig 3. A.
3.A
b. Connect the Fountain Light (A) to the Transformer (B)
as shown in Fig. 3.B.
3.B
c. Lift your waterfall into place and engage the bracket
on the back of the fountain by lowering it onto the
Wall Bracket (F) as shown in Fig 3.C.
3.C
d. After mounting your water feature to the wall, you can now start to connect the
Pump (F). Install the Pump and Quick Connect Valve (D) as shown below. Simply
attach the valve by engaging the receiver and twisting into position. See Fig 3.A &
3.B
3.A 3.B 3.C
e. Position your Water Feature Lights (A) as shown in Fig 3.D- 3.F.
3.D 3.E 3.F