Instructions / Assembly

other ‘leaks’, are usually caused by debris getting into the fountain, buildup of minerals, algae from
poor water or lack of maintenance. Pumps can also fail due to water levels not being maintained in the
reservoir and this is not covered by the warranty.
MANUFACTURERS DEFECT DEFINED - A distinct and obvious flaw in the manufacturing
of the product that inhibits the product’s ability to function properly or a distinct and obvious flaw in
the workmanship of the product that affects its physical appearance. Bluworld water features are
manufactured under generally accepted manufacturing techniques as recognized by the International
Organization of Standardization. Our products are hand made and hand finished thus minor
scratches in materials within accepted ranges are not considered defects.
SLATE- Many of our products contain natural slate. Slate can vary to a large degree and that
individuality is what is considered to be unique and inherent to the beauty of the natural product as no
two are exactly alike. Photos in our marketing materials are representative of our slate products but
should not be relied on to duplicate the photo. We use natural mined slate in our products. Personal
taste in the appearance of slate is not considered a reason for a return.
MIRRORS-We use tempered mirror in our water features for safety reasons and the process of
tempering the mirror may cause the mirrors not to reflect images in the same manner of a
non-tempered mirror which is designed to reflect images in their true form. When water is flowing
over our tempered mirror surfaces, these slight differences are not noticeable and this is not
considered a reason for a return.
COPPER- Since we have numerous products manufactured with natural pure copper it is
important to note that we do protect the copper with a clear heat-baked on powder coat material. This
material should last for a minimum of one year but water conditions may affect the length of
protection it will afford to the copper. Copper oxidizes differently than other metals and personal
tastes differ as to an individual’s perception of it. It may oxidize as a green oxidation or rose colored
blush. You can minimize this by wiping down the oxidation and then applying wax or Pledge™ to that
area. This condition is not a reason for a return or warranty claim.