Instructions / Assembly

635 W. Michigan Street Orlando, FL 32805 · PH 407-426-7674 · Fax [phone]
Page 7 of 8
RF Wireless Touching LED Remote Controller
(Color Adjusting)
1. Technical Parameters (remote control):
• Power supply: AAA battery*3pcs
• Working voltage: DC 12V/24V
• Cover material: ABS
• Fabrication processing: multicolor printing & UV varnish
• Output control: 3circuits (R/G/B)
• Control current: 6A/circuit
• Connecting method: common anode
• Dimension: L85*W64*H24
• Receiving range: 20meters
2. Functions of Keys
• Key 1: on/off
• Key 2: light changing mode (15 modes)
• Key 3: color light/white light switching mode
• Key 4: turn up (brightness/speed)
• Key 5: turn down (brightness/speed)
3. How to use
• Press Key 1 to turn on/off in any state.
• Press Key 2 to activate light changing mode. A new mode each press, 15 modes in total.
• Press Key 3 once to activate while light mode, changing brightness by pressing Key 4/Key 5. Press Key 3 twice to
activate color light mode, changing brightness by pressing Key 4/Key 5 or changing light color by touching the color
ring.
• Resume function. The previous setting will be resumed while power on again.
• Matching code: Press Key 4 once within 3 seconds when power on again, the light will blink 3 times if matching is
successful.
• Cleaning code: Press Key 4 five times within 3 seconds when power on again, the light will blink 6 times if clearing is
successful.
1
Auto color changing 8 grades of brightness to adjust by pressing Key 4 or Key 5
2 Three colors jumps to change 8 grades of speed to adjust by pressing Key 4 or Key 5
3
Seven colors jumps to change
4
Three colors jumps to gradual change
5
Seven colors jumps to gradual change
6 Red color jumps to change 8 grades of brightness to adjust by pressing Key 4 or Key 5
7 Blue color jumps to change
8
Purple color jumps to change
9 Green color jumps to change 8 grades of brightness to adjust by pressing Key 4 or Key 5
10 Yellow color jumps to change
11
Cyan color jumps to change
12 White color jumps to change
13
Red/Blue light twinkles alternately
8 grades of brightness to adjust by pressing Key 4 or Key 5
14 Green/Blue light twinkles alternately
15
Red/Green light twinkles alternately
4. Caution: Please don’t touch or press the color ring while loading the
batteries to protect the sensitiveness. Please use the remote controller 3
seconds after the batteries are loaded. Please reload the batteries when
you find the color ring is not sensitive.
5. Connecting chart: