User's Guide

Settings Page 32 of 48

If the short messages fail to send or are being sent, they will be sent in the next minute until they are sent

successfully. Keeping in standby mode for 24 hours or powering the phone on again, the phone will send a

short message again to the pre-determined phone number. When thenumber of the successful short messages

comes to a certain amount (15 times), none illegal used SIM card card can be used on the phone. The phone

will power off automatically.

Note:

Please report a case to the Public Security Organs when the phone is stolen. But they do not ensure to find

the stolen phone. Therefore, please take good care of your personal belongings.

If the phone considers the card is illegally used, Unauthorized to use will appear if someone wants to

activate the MSD, namely the corresponding functions under the MSD menu can not be used. If other cards

are used to power on the phone and the password is correct, the number of the messages will be counted

form 0, and the peompt Bind the card or not will appear. Choose Bind the card, the phone will update the

IMSI card information, regarding the card as the appointed card of the phone.

Start: Firstly set the password to start this function, input the guardlock password and notify the

mobile phone when starting (Receive illegally using SIM card of this mobile phone and send the

information about the illegal SIM card), the settings is comleted, and the guardlock function can be

started.

Cancel: To cancel the MSD. You have to input MSD password when canceling the function.

Change password: Change the MSD password.

Warning:

Please use this function cautiously. You can not use the phone if you forget the password.

Fixed Dialling:Start and close of the fixed dialling, and management of the fixed dialling list.

Blacklist: Settings of the blacklist and management of the list.

Call settings

Including:

Dual SIM settings: including Standby mode, Reply by original SIM, Set SIM name.

Call Divert:

 Divert all voice calls: After the function is activated, you can divert all incoming calls to

Voicemail or the pre-determined phone numbers. Choose [Check Status] to view the current status of

the Divert all voice calls service.

 Divert when busy: After the function is activated, you can divert the incoming calls to Voicemail

or the pre-determined phone numbers if you are on a call

 Divert when not answered: After the function is activated, if the call is not answered within the

pre-determined time, you can divert the incoming calls to Voicemail or the pre-determined phone numbers.