User's Manual

You may set functions in relations to cell phone security.
Restore the factory settings
Enter the correct password of the phone will have to change your phone settings back to factory
default state value, the user of the function be used with caution. (Default password: 0000).
■Profiles
You may customize the profiles and activate any profile in order to use a specific function. You
may set the Ring settings, Adjust volume, Ring type, and etc.
3. PC connect
■USB
Use the T-Flash inserted in the mobile phone as U-Disk. You can transfer music, videos, games
and other files form PC to the T-Flash by USB cable. Enjoy it anytime and anywhere.
■COM PORT
Establish a modem on the local computer and construct a network, and the serial interface is
connected after signing in with the account.
4.Maintenance and service
Refer to the local dealer for supply of accessories. Hereafter are some precautions for usage of
the accessories, Only use batteries, chargers and accessories approved by the manufacturer.
Usage of other types of batteries, chargers and accessories may result in violence of the
certification or warranty terms or even lead to danger, Keep the equipment dry, Don't keep the
equipment in under cooled places; otherwise, when the temperature rises to normal, moisture
may be generated within the equipment, resulting in damage of the circuit board. .Only use
matched or approved antenna .
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.